sys/dev/video/bktr/bktr_card.c
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 | /*- * 1. Redistributions of source code must retain the * Copyright (c) 1997 Amancio Hasty, 1999 Roger Hardiman * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Amancio Hasty and * Roger Hardiman * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/dev/bktr/bktr_card.c,v 1.36 2005/12/04 10:06:03 ru Exp $ */ /* * This is part of the Driver for Video Capture Cards (Frame grabbers) * and TV Tuner cards using the Brooktree Bt848, Bt848A, Bt849A, Bt878, Bt879 * chipset. * Copyright Roger Hardiman and Amancio Hasty. * * bktr_card : This deals with identifying TV cards. * trying to find the card make and model of card. * trying to find the type of tuner fitted. * reading the configuration EEPROM. * locating i2c devices. */ #include "opt_bktr.h" /* Include any kernel config options */ #include <sys/param.h> #include <sys/systm.h> #include <sys/vnode.h> #include <sys/bus.h> #include <bus/pci/pcivar.h> #include <dev/video/meteor/ioctl_meteor.h> #include <dev/video/bktr/ioctl_bt848.h> /* extensions to ioctl_meteor.h */ #include <dev/video/bktr/bktr_reg.h> #include <dev/video/bktr/bktr_core.h> #include <dev/video/bktr/bktr_tuner.h> #include <dev/video/bktr/bktr_card.h> #include <dev/video/bktr/bktr_audio.h> #include "pcidevs.h" #include <bus/pci/pcireg.h> /* Various defines */ #define HAUP_REMOTE_INT_WADDR 0x30 #define HAUP_REMOTE_INT_RADDR 0x31 #define HAUP_REMOTE_EXT_WADDR 0x34 #define HAUP_REMOTE_EXT_RADDR 0x35 /* address of BTSC/SAP decoder chip */ #define TDA9850_WADDR 0xb6 #define TDA9850_RADDR 0xb7 /* address of MSP3400C chip */ #define MSP3400C_WADDR 0x80 #define MSP3400C_RADDR 0x81 /* address of DPL3518A chip */ #define DPL3518A_WADDR 0x84 #define DPL3518A_RADDR 0x85 /* EEProm (128 * 8) on an STB card */ #define X24C01_WADDR 0xae #define X24C01_RADDR 0xaf /* EEProm (256 * 8) on a Hauppauge card */ /* and on most BT878s cards to store the sub-system vendor id */ #define PFC8582_WADDR 0xa0 #define PFC8582_RADDR 0xa1 #if defined(BKTR_SYSTEM_DEFAULT) && BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL #define DEFAULT_TUNER PHILIPS_PALI #else #define DEFAULT_TUNER PHILIPS_NTSC #endif /* * the data for each type of card * * Note: * these entried MUST be kept in the order defined by the CARD_XXX defines! */ static const struct CARDTYPE cards[] = { { CARD_UNKNOWN, /* the card id */ "Unknown", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx unknown */ 0, 0, 0, /* EEProm unknown */ 0, /* EEProm unknown */ { 0, 0, 0, 0, 0 }, 0 }, /* GPIO mask */ { CARD_MIRO, /* the card id */ "Pinnacle/Miro TV", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx unknown */ 0, 0, 0, /* EEProm unknown */ 0, /* size unknown */ { 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_HAUPPAUGE, /* the card id */ "Hauppauge WinCast/TV", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, PFC8582_WADDR, /* EEProm type */ (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */ { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_STB, /* the card id */ "STB TV/PCI", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, X24C01_WADDR, /* EEProm type */ (u_char)(128 / EEPROMBLOCKSIZE), /* 128 bytes */ { 0x00, 0x01, 0x02, 0x02, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_INTEL, /* the card id */ "Intel Smart Video III/VideoLogic Captivator PCI", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, 0, 0, 0, 0, { 0, 0, 0, 0, 0 }, /* audio MUX values */ 0x00 }, /* GPIO mask */ { CARD_IMS_TURBO, /* the card id */ "IMS TV Turbo", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, PFC8582_WADDR, /* EEProm type */ (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */ { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_AVER_MEDIA, /* the card id */ "AVer Media TV/FM", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x0c, 0x08, 0x04, 0x00, 1 }, /* audio MUX values */ 0x1f }, /* GPIO mask */ { CARD_OSPREY, /* the card id */ "MMAC Osprey", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, PFC8582_WADDR, /* EEProm type */ (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */ { 0x00, 0x00, 0x00, 0x00, 0 }, /* audio MUX values */ 0 }, /* GPIO mask */ { CARD_NEC_PK, /* the card id */ "NEC PK-UG-X017", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x01, 0x02, 0x01, 0x00, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_IO_BCTV2, /* the card id */ "I/O DATA GV-BCTV2/PCI", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x00, 0x00, 0x00, 0x00, 1 }, /* Has special MUX handler */ 0x0f }, /* GPIO mask */ { CARD_FLYVIDEO, /* the card id */ "FlyVideo", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, /* msp34xx is optional */ 0, /* dpl3518a is optional */ 0xac, /* EEProm type */ (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */ { 0x000, 0x800, 0x400, 0x8dff00, 1 },/* audio MUX values */ 0x8dff00 }, /* GPIO mask */ { CARD_ZOLTRIX, /* the card id */ "Zoltrix", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, /* msp34xx is optional */ 0, /* dpl3518a is optional */ 0, /* EEProm type */ 0, /* EEProm size */ { 0x04, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_KISS, /* the card id */ "KISS TV/FM PCI", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, /* msp34xx is optional */ 0, /* dpl3518a is optional */ 0, /* EEProm type */ 0, /* EEProm size */ { 0x0c, 0x00, 0x0b, 0x0b, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_VIDEO_HIGHWAY_XTREME, /* the card id */ "Video Highway Xtreme", /* the 'name' */ NULL, /* the tuner */ 0, 0, 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x00, 0x02, 0x01, 0x04, 1 }, /* audio MUX values */ 0x0f }, /* GPIO mask */ { CARD_ASKEY_DYNALINK_MAGIC_TVIEW, /* the card id */ "Askey/Dynalink Magic TView", /* the 'name' */ NULL, /* the tuner */ 0, 0, 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x400, 0xE00, 0x400, 0xC00, 1 }, /* audio MUX values */ 0xE00 }, /* GPIO mask */ { CARD_LEADTEK, /* the card id */ "Leadtek Winfast TV 2000", /* the 'name' */ NULL, /* the tuner */ 0, 0, 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ /* Tuner, Extern, Intern, Mute, Enabled */ { 0x621000, 0x621000, 0x621000, 0xE21000, 1 }, /* audio MUX values */ 0xfff000 }, /* GPIO mask */ { CARD_TERRATVPLUS, /* the card id */ "TerraTVplus", /* the 'name' */ NULL, /* the tuner */ 0, 0, 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x20000, 0x00000, 0x30000, 0x40000, 1 }, /* audio MUX values*/ 0x70000 }, /* GPIO mask */ { CARD_IO_BCTV3, /* the card id */ "I/O DATA GV-BCTV3/PCI", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ /* Tuner, Extern, Intern, Mute, Enabled */ { 0x10000, 0, 0x10000, 0, 1 }, /* audio MUX values */ 0x10f00 }, /* GPIO mask */ { CARD_AOPEN_VA1000, /* the card id */ "AOpen VA1000", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm unknown */ 0, /* size unknown */ { 0x02, 0x00, 0x00, 0x00, 1 }, /* audio MUX values */ 0x18e0 }, /* GPIO mask */ { CARD_PINNACLE_PCTV_RAVE, /* the card id */ "Pinnacle PCTV Rave", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx unknown */ 0, 0, 0, /* EEProm unknown */ 0, /* size unknown */ { 0x02, 0x01, 0x00, 0x0a, 1 }, /* audio MUX values */ 0x03000F }, /* GPIO mask */ { CARD_PIXELVIEW_PLAYTV_PAK, /* the card id */ "PixelView PlayTV Pak", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, PFC8582_WADDR, /* EEProm type */ (u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */ { 0x20000, 0x80000, 0, 0xa8000, 1 }, /* audio MUX values */ 0xAA0000 }, /* GPIO mask */ { CARD_TERRATVALUE, /* the card id */ "TerraTec TValue", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ /* Tuner, Extern, Intern, Mute, Enabled */ { 0x500, 0x900, 0x300, 0x900, 1 }, /* audio MUX values */ 0xffff00 }, /* GPIO mask */ { CARD_PIXELVIEW_PLAYTV_PRO_REV_4C, /* the card id */ "PixelView PlayTV Pro REV-4C ", /* the 'name' */ NULL, /* the tuner */ 0, /* the tuner i2c address */ 0, /* dbx is optional */ 0, 0, 0, /* EEProm type */ 0, /* EEProm size */ { 0x01, 0x04, 0x01, 0x03, 1 }, /* audio MUX values */ 0x00ffffff }, }; struct bt848_card_sig bt848_card_signature[1]= { /* IMS TURBO TV : card 5 */ { 5,9, {00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00}} }; /* * Write to the configuration EEPROM on the card. * This is dangerous and will mess up your card. Therefore it is not * implemented. */ int writeEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data ) { return( -1 ); } /* * Read the contents of the configuration EEPROM on the card. * (This is not fitted to all makes of card. All Hauppauge cards have them * and so do newer Bt878 based cards. */ int readEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data ) { int x; int addr; int max; int byte; /* get the address of the EEProm */ addr = (int)(bktr->card.eepromAddr & 0xff); if ( addr == 0 ) return( -1 ); max = (int)(bktr->card.eepromSize * EEPROMBLOCKSIZE); if ( (offset + count) > max ) return( -1 ); /* set the start address */ if ( i2cWrite( bktr, addr, offset, -1 ) == -1 ) return( -1 ); /* the read cycle */ for ( x = 0; x < count; ++x ) { if ( (byte = i2cRead( bktr, (addr | 1) )) == -1 ) return( -1 ); data[ x ] = byte; } return( 0 ); } #define ABSENT (-1) /* * get a signature of the card * read all 128 possible i2c read addresses from 0x01 thru 0xff * build a bit array with a 1 bit for each i2c device that responds * * XXX FIXME: use offset & count args */ int signCard( bktr_ptr_t bktr, int offset, int count, u_char* sig ) { int x; for ( x = 0; x < 16; ++x ) sig[ x ] = 0; for ( x = 0; x < count; ++x ) { if ( i2cRead( bktr, (2 * x) + 1 ) != ABSENT ) { sig[ x / 8 ] |= (1 << (x % 8) ); } } return( 0 ); } /* * check_for_i2c_devices. * Some BT848 cards have no tuner and no additional i2c devices * eg stereo decoder. These are used for video conferencing or capture from * a video camera. (eg VideoLogic Captivator PCI, Intel SmartCapture card). * * Determine if there are any i2c devices present. There are none present if * a) reading from all 128 devices returns ABSENT (-1) for each one * (eg VideoLogic Captivator PCI with BT848) * b) reading from all 128 devices returns 0 for each one * (eg VideoLogic Captivator PCI rev. 2F with BT848A) */ static int check_for_i2c_devices( bktr_ptr_t bktr ){ int x, temp_read; int i2c_all_0 = 1; int i2c_all_absent = 1; for ( x = 0; x < 128; ++x ) { temp_read = i2cRead( bktr, (2 * x) + 1 ); if (temp_read != 0) i2c_all_0 = 0; if (temp_read != ABSENT) i2c_all_absent = 0; } if ((i2c_all_0) || (i2c_all_absent)) return 0; else return 1; } /* * Temic/Philips datasheets say tuners can be at i2c addresses 0xc0, 0xc2, * 0xc4 or 0xc6, settable by links on the tuner. * Determine the actual address used on the TV card by probing read addresses. */ static int locate_tuner_address( bktr_ptr_t bktr) { if (i2cRead( bktr, 0xc1) != ABSENT) return 0xc0; if (i2cRead( bktr, 0xc3) != ABSENT) return 0xc2; if (i2cRead( bktr, 0xc5) != ABSENT) return 0xc4; if (i2cRead( bktr, 0xc7) != ABSENT) return 0xc6; return -1; /* no tuner found */ } /* * Search for a configuration EEPROM on the i2c bus by looking at i2c addresses * where EEPROMs are usually found. * On some cards, the EEPROM appears in several locations, but all in the * range 0xa0 to 0xae. */ static int locate_eeprom_address( bktr_ptr_t bktr) { if (i2cRead( bktr, 0xa0) != ABSENT) return 0xa0; if (i2cRead( bktr, 0xac) != ABSENT) return 0xac; if (i2cRead( bktr, 0xae) != ABSENT) return 0xae; return -1; /* no eeprom found */ } /* * determine the card brand/model * BKTR_OVERRIDE_CARD, BKTR_OVERRIDE_TUNER, BKTR_OVERRIDE_DBX and * BKTR_OVERRIDE_MSP can be used to select a specific device, * regardless of the autodetection and i2c device checks. * * The scheme used for probing cards faces these problems: * It is impossible to work out which type of tuner is actually fitted, * (the driver cannot tell if the Tuner is PAL or NTSC, Temic or Philips) * It is impossible to determine what audio-mux hardware is connected. * It is impossible to determine if there is extra hardware connected to the * GPIO pins (eg radio chips or MSP34xx reset logic) * * However some makes of card (eg Hauppauge) come with a configuration eeprom * which tells us the make of the card. Most eeproms also tell us the * tuner type and other features of the the cards. * * The current probe code works as follows * A) If the card uses a Bt878/879: * 1) Read the sub-system vendor id from the configuration EEPROM. * Select the required tuner, audio mux arrangement and any other * onboard features. If this fails, move to step B. * B) If it card uses a Bt848, 848A, 849A or an unknown Bt878/879: * 1) Look for I2C devices. If there are none fitted, it is an Intel or * VideoLogic cards. * 2) Look for a configuration EEPROM. * 2a) If there is one at I2C address 0xa0 it may be * a Hauppauge or an Osprey. Check the EEPROM contents to determine which * one it is. For Hauppauge, select the tuner type and audio hardware. * 2b) If there is an EEPROM at I2C address 0xa8 it will be an STB card. * We still have to guess on the tuner type. * * C) If we do not know the card type from (A) or (B), guess at the tuner * type based on the I2C address of the tuner. * * D) After determining the Tuner Type, we probe the i2c bus for other * devices at known locations, eg IR-Remote Control, MSP34xx and TDA * stereo chips. */ /* * These are the sub-system vendor ID codes stored in the * configuration EEPROM used on Bt878/879 cards. They should match the * number assigned to the company by the PCI Special Interest Group */ /* Following not confirmed with http://members.hyperlink.net.au/~chart, so not added to NetBSD's pcidevs */ #define PCI_VENDOR_LEADTEK_ALT 0x6606 #define PCI_VENDOR_LEADTEK_ALT_2 0x6607 #define PCI_VENDOR_LEADTEK_ALT_3 0x107d #define PCI_VENDOR_FLYVIDEO 0x1851 #define PCI_VENDOR_FLYVIDEO_2 0x1852 #define PCI_VENDOR_IODATA 0x10fc #define PCI_VENDOR_PINNACLE_ALT 0xBD11 /* They got their own ID backwards? */ #define PCI_VENDOR_PINNACLE_NEW 0x11BD #define MODEL_IODATA_GV_BCTV3_PCI 0x4020 #define MODEL_TERRATVALUE_1117 0x1117 #define MODEL_TERRATVALUE_1118 0x1118 #define MODEL_TERRATVALUE_1119 0x1119 #define MODEL_TERRATVALUE_111A 0x111a #define MODEL_TERRATVALUE_1134 0x1134 void probeCard( bktr_ptr_t bktr, int verbose, int unit ) { int card, i,j, card_found; int status; u_char probe_signature[128], *probe_temp; int any_i2c_devices; u_char eeprom[256]; int tuner_i2c_address = -1; int eeprom_i2c_address = -1; /* Select all GPIO bits as inputs */ OUTL(bktr, BKTR_GPIO_OUT_EN, 0); if (bootverbose) kprintf("%s: GPIO is 0x%08x\n", bktr_name(bktr), INL(bktr, BKTR_GPIO_DATA)); #ifdef HAUPPAUGE_MSP_RESET /* Reset the MSP34xx audio chip. This resolves bootup card * detection problems with old Bt848 based Hauppauge cards with * MSP34xx stereo audio chips. This must be user enabled because * at this point the probe function does not know the card type. */ OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5)); OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */ DELAY(2500); /* wait 2.5ms */ OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */ DELAY(2500); /* wait 2.5ms */ OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */ DELAY(2500); /* wait 2.5ms */ #endif /* Check for the presence of i2c devices */ any_i2c_devices = check_for_i2c_devices( bktr ); /* Check for a user specified override on the card selection */ #if defined( BKTR_OVERRIDE_CARD ) bktr->card = cards[ (card = BKTR_OVERRIDE_CARD) ]; goto checkEEPROM; #endif if (bktr->bt848_card != -1 ) { bktr->card = cards[ (card = bktr->bt848_card) ]; goto checkEEPROM; } /* No override, so try and determine the make of the card */ /* On BT878/879 cards, read the sub-system vendor id */ /* This identifies the manufacturer of the card and the model */ /* In theory this can be read from PCI registers but this does not */ /* appear to work on the FlyVideo 98. Hauppauge also warned that */ /* the PCI registers are sometimes not loaded correctly. */ /* Therefore, I will read the sub-system vendor ID from the EEPROM */ /* (just like the Bt878 does during power up initialisation) */ if ((bktr->id==BROOKTREE_878) || (bktr->id==BROOKTREE_879)) { /* Try and locate the EEPROM */ eeprom_i2c_address = locate_eeprom_address( bktr ); if (eeprom_i2c_address != -1) { unsigned int subsystem_vendor_id; /* vendors PCI-SIG ID */ unsigned int subsystem_id; /* board model number */ unsigned int byte_252, byte_253, byte_254, byte_255; bktr->card = cards[ (card = CARD_UNKNOWN) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); readEEProm(bktr, 0, 256, (u_char *) &eeprom ); byte_252 = (unsigned int)eeprom[252]; byte_253 = (unsigned int)eeprom[253]; byte_254 = (unsigned int)eeprom[254]; byte_255 = (unsigned int)eeprom[255]; subsystem_id = (byte_252 << 8) | byte_253; subsystem_vendor_id = (byte_254 << 8) | byte_255; if ( bootverbose ) kprintf("%s: subsystem 0x%04x 0x%04x\n", bktr_name(bktr), subsystem_vendor_id, subsystem_id); if (subsystem_vendor_id == PCI_VENDOR_AVERMEDIA) { bktr->card = cards[ (card = CARD_AVER_MEDIA) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_HAUPPAUGE) { bktr->card = cards[ (card = CARD_HAUPPAUGE) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if ((subsystem_vendor_id == PCI_VENDOR_FLYVIDEO) || (subsystem_vendor_id == PCI_VENDOR_FLYVIDEO_2) ) { bktr->card = cards[ (card = CARD_FLYVIDEO) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_STB) { bktr->card = cards[ (card = CARD_STB) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_ASKEY) { bktr->card = cards[ (card = CARD_ASKEY_DYNALINK_MAGIC_TVIEW) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if ((subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT) || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_2) || (subsystem_vendor_id == PCI_VENDOR_LEADTEK_ALT_3)) { bktr->card = cards[ (card = CARD_LEADTEK) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_PINNACLE_ALT || subsystem_vendor_id == PCI_VENDOR_PINNACLE_NEW) { bktr->card = cards[ (card = CARD_MIRO) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_IODATA && subsystem_id == MODEL_IODATA_GV_BCTV3_PCI) { bktr->card = cards[ (card = CARD_IO_BCTV3) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } if (subsystem_vendor_id == PCI_VENDOR_TERRATEC) { switch (subsystem_id) { case MODEL_TERRATVALUE_1117: case MODEL_TERRATVALUE_1118: case MODEL_TERRATVALUE_1119: case MODEL_TERRATVALUE_111A: case MODEL_TERRATVALUE_1134: bktr->card = cards[ (card = CARD_TERRATVALUE) ]; bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } } /* Vendor is unknown. We will use the standard probe code */ /* which may not give best results */ kprintf("%s: Warning - card vendor 0x%04x (model 0x%04x) unknown.\n", bktr_name(bktr), subsystem_vendor_id, subsystem_id); } else { kprintf("%s: Card has no configuration EEPROM. Cannot determine card make.\n", bktr_name(bktr)); } } /* end of bt878/bt879 card detection code */ /* If we get to this point, we must have a Bt848/848A/849A card */ /* or a Bt878/879 with an unknown subsystem vendor id */ /* Try and determine the make of card by clever i2c probing */ /* Check for i2c devices. If none, move on */ if (!any_i2c_devices) { bktr->card = cards[ (card = CARD_INTEL) ]; bktr->card.eepromAddr = 0; bktr->card.eepromSize = 0; goto checkTuner; } /* Look for Hauppauge, STB and Osprey cards by the presence */ /* of an EEPROM */ /* Note: Bt878 based cards also use EEPROMs so we can only do this */ /* test on BT848/848A and 849A based cards. */ if ((bktr->id==BROOKTREE_848) || (bktr->id==BROOKTREE_848A) || (bktr->id==BROOKTREE_849A)) { /* At i2c address 0xa0, look for Hauppauge and Osprey cards */ if ( (status = i2cRead( bktr, PFC8582_RADDR )) != ABSENT ) { /* Read the eeprom contents */ bktr->card = cards[ (card = CARD_UNKNOWN) ]; bktr->card.eepromAddr = PFC8582_WADDR; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); readEEProm(bktr, 0, 128, (u_char *) &eeprom ); /* For Hauppauge, check the EEPROM begins with 0x84 */ if (eeprom[0] == 0x84) { bktr->card = cards[ (card = CARD_HAUPPAUGE) ]; bktr->card.eepromAddr = PFC8582_WADDR; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } /* For Osprey, check the EEPROM begins with "MMAC" */ if ( (eeprom[0] == 'M') &&(eeprom[1] == 'M') &&(eeprom[2] == 'A') &&(eeprom[3] == 'C')) { bktr->card = cards[ (card = CARD_OSPREY) ]; bktr->card.eepromAddr = PFC8582_WADDR; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); goto checkTuner; } kprintf("%s: Warning: Unknown card type. EEPROM data not recognised\n", bktr_name(bktr)); kprintf("%s: %x %x %x %x\n", bktr_name(bktr), eeprom[0],eeprom[1],eeprom[2],eeprom[3]); } /* look for an STB card */ if ( (status = i2cRead( bktr, X24C01_RADDR )) != ABSENT ) { bktr->card = cards[ (card = CARD_STB) ]; bktr->card.eepromAddr = X24C01_WADDR; bktr->card.eepromSize = (u_char)(128 / EEPROMBLOCKSIZE); goto checkTuner; } } signCard( bktr, 1, 128, (u_char *) &probe_signature ); if (bootverbose) { kprintf("%s: card signature: ", bktr_name(bktr)); for (j = 0; j < Bt848_MAX_SIGN; j++) { kprintf(" %02x ", probe_signature[j]); } kprintf("\n\n"); } for (i = 0; i < (sizeof bt848_card_signature)/ sizeof (struct bt848_card_sig); i++ ) { card_found = 1; probe_temp = (u_char *) &bt848_card_signature[i].signature; for (j = 0; j < Bt848_MAX_SIGN; j++) { if ((probe_temp[j] & 0xf) != (probe_signature[j] & 0xf)) { card_found = 0; break; } } if (card_found) { bktr->card = cards[ card = bt848_card_signature[i].card]; eeprom_i2c_address = locate_eeprom_address( bktr ); if (eeprom_i2c_address != -1) { bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); } else { bktr->card.eepromAddr = 0; bktr->card.eepromSize = 0; } tuner_i2c_address = locate_tuner_address( bktr ); select_tuner( bktr, bt848_card_signature[i].tuner ); goto checkDBX; } } /* We do not know the card type. Default to Miro */ bktr->card = cards[ (card = CARD_MIRO) ]; checkEEPROM: /* look for a configuration eeprom */ eeprom_i2c_address = locate_eeprom_address( bktr ); if (eeprom_i2c_address != -1) { bktr->card.eepromAddr = eeprom_i2c_address; bktr->card.eepromSize = (u_char)(256 / EEPROMBLOCKSIZE); } else { bktr->card.eepromAddr = 0; bktr->card.eepromSize = 0; } checkTuner: #if !defined( BKTR_OVERRIDE_TUNER ) if (card == CARD_MIRO && mt2032_init(bktr) == 0 && bktr->bt848_tuner == -1) { bktr->card = cards[ (card = CARD_PINNACLE_PCTV_RAVE) ]; select_tuner( bktr, TUNER_MT2032 ); goto checkDBX; } #endif /* look for a tuner */ tuner_i2c_address = locate_tuner_address( bktr ); if ( tuner_i2c_address == -1 ) { select_tuner( bktr, NO_TUNER ); goto checkDBX; } #if defined( BKTR_OVERRIDE_TUNER ) select_tuner( bktr, BKTR_OVERRIDE_TUNER ); goto checkDBX; #endif if (bktr->bt848_tuner != -1 ) { select_tuner( bktr, bktr->bt848_tuner & 0xff ); goto checkDBX; } /* Check for i2c devices */ if (!any_i2c_devices) { select_tuner( bktr, NO_TUNER ); goto checkDBX; } /* differentiate type of tuner */ switch (card) { case CARD_MIRO: switch (((INL(bktr, BKTR_GPIO_DATA) >> 10)-1)&7) { case 0: select_tuner( bktr, TEMIC_PAL ); break; case 1: select_tuner( bktr, PHILIPS_PAL ); break; case 2: select_tuner( bktr, PHILIPS_NTSC ); break; case 3: select_tuner( bktr, PHILIPS_SECAM ); break; case 4: select_tuner( bktr, NO_TUNER ); break; case 5: select_tuner( bktr, PHILIPS_PALI ); break; case 6: select_tuner( bktr, TEMIC_NTSC ); break; case 7: select_tuner( bktr, TEMIC_PALI ); break; } goto checkDBX; break; case CARD_HAUPPAUGE: /* Hauppauge kindly supplied the following Tuner Table */ /* FIXME: I think the tuners the driver selects for types */ /* 0x08 and 0x15 may be incorrect but no one has complained. */ /* Old Temic tuners had their own API, but newer Temic tuners */ /* have the same API as Philips tuners */ /* ID Tuner Model Format We select Format 0x00 NONE 0x01 EXTERNAL 0x02 OTHER 0x03 Philips FI1216 BG 0x04 Philips FI1216MF BGLL' PHILIPS_SECAM 0x05 Philips FI1236 MN PHILIPS_NTSC 0x06 Philips FI1246 I PHILIPS_PALI 0x07 Philips FI1256 DK 0x08 Philips FI1216 MK2 BG PHILIPS_PALI 0x09 Philips FI1216MF MK2 BGLL' PHILIPS_SECAM 0x0a Philips FI1236 MK2 MN PHILIPS_NTSC 0x0b Philips FI1246 MK2 I PHILIPS_PALI 0x0c Philips FI1256 MK2 DK 0x0d Temic 4032FY5 NTSC TEMIC_NTSC 0x0e Temic 4002FH5 BG TEMIC_PAL 0x0f Temic 4062FY5 I TEMIC_PALI 0x10 Philips FR1216 MK2 BG 0x11 Philips FR1216MF MK2 BGLL' PHILIPS_FR1236_SECAM 0x12 Philips FR1236 MK2 MN PHILIPS_FR1236_NTSC 0x13 Philips FR1246 MK2 I 0x14 Philips FR1256 MK2 DK 0x15 Philips FM1216 BG PHILIPS_FR1216_PAL 0x16 Philips FM1216MF BGLL' PHILIPS_FR1236_SECAM 0x17 Philips FM1236 MN PHILIPS_FR1236_NTSC 0x18 Philips FM1246 I 0x19 Philips FM1256 DK 0x1a Temic 4036FY5 MN (FI1236 MK2 clone) PHILIPS_NTSC 0x1b Samsung TCPN9082D MN 0x1c Samsung TCPM9092P Pal BG/I/DK 0x1d Temic 4006FH5 BG PHILIPS_PALI 0x1e Samsung TCPN9085D MN/Radio 0x1f Samsung TCPB9085P Pal BG/I/DK / Radio 0x20 Samsung TCPL9091P Pal BG & Secam L/L' 0x21 Temic 4039FY5 NTSC Radio 0x22 Philips FQ1216ME Pal BGIDK & Secam L/L' 0x23 Temic 4066FY5 Pal I (FI1246 MK2 clone) PHILIPS_PALI 0x24 Philips TD1536 MN/ATSCDigital 0x25 Philips TD1536D MN/ATSCDigital DUAL INPUT 0x26 Philips FMR1236 M/N FM(no demod) 0x27 Philips FI1256MP B/G, D/K 0x28 Samsung TCPQ9091P BG/I/DK, L/L' 0x29 Temic 4006FN5 BG/I/DK 0x2a Temic 4009FR5 BG FM PHILIPS_FR1216_PAL 0x2b Temic 4046FM5 B/G, I, D/K, L/L' 0x2c Temic 4009FN5 B/G, I, D/K, FM (no demod) 0x2d Philips TD1536D_FH_44 MN/ATSCDigital DUAL INPUT */ /* Determine the model number from the eeprom */ if (bktr->card.eepromAddr != 0) { /* eeprom data block structure */ unsigned char *block_1, *block_2, *block_3; int block_1_data_size, block_2_data_size; int block_1_total_size, block_2_total_size; unsigned int model,revision; unsigned char tuner_code; unsigned char no_audio_mux; readEEProm(bktr, 0, 128, (u_char *) &eeprom ); /* LOCATE THE EEPROM DATA BLOCKS */ block_1 = &eeprom[0]; block_1_data_size = (block_1[2] << 8 | block_1[1]); block_1_total_size = block_1_data_size + 3; /* Header bytes */ block_2 = &eeprom[block_1_total_size]; block_2_data_size = (block_2[2] << 8 | block_2[1]); block_2_total_size = block_2_data_size + 3; /* Header bytes */ block_3 = &eeprom[block_1_total_size + block_2_total_size]; model = (block_1[12] << 8 | block_1[11]); revision = (block_1[15] << 16 | block_1[14] << 8 | block_1[13]); tuner_code = block_1[9]; no_audio_mux = ((block_3[3] >> 7) &0x01); if (no_audio_mux) bktr->audio_mux_present = 0; if (verbose) kprintf("%s: Hauppauge Model %d %c%c%c%c\n", bktr_name(bktr), model, ((revision >> 18) & 0x3f) + 32, ((revision >> 12) & 0x3f) + 32, ((revision >> 6) & 0x3f) + 32, ((revision >> 0) & 0x3f) + 32 ); /* Determine the tuner type from the eeprom */ switch (tuner_code) { case 0x5: case 0x0a: case 0x1a: select_tuner( bktr, PHILIPS_NTSC ); goto checkDBX; case 0x4: case 0x9: select_tuner( bktr, PHILIPS_SECAM ); goto checkDBX; case 0x11: case 0x16: select_tuner( bktr, PHILIPS_FR1236_SECAM ); goto checkDBX; case 0x12: case 0x17: case 0x21: select_tuner( bktr, PHILIPS_FR1236_NTSC ); goto checkDBX; case 0x6: case 0x8: case 0xb: case 0x1d: case 0x23: select_tuner( bktr, PHILIPS_PALI ); goto checkDBX; case 0xd: select_tuner( bktr, TEMIC_NTSC ); goto checkDBX; case 0xe: select_tuner( bktr, TEMIC_PAL ); goto checkDBX; case 0xf: select_tuner( bktr, TEMIC_PALI ); goto checkDBX; case 0x15: select_tuner( bktr, PHILIPS_FR1216_PAL ); goto checkDBX; case 0x2a: bktr->msp_use_mono_source = 1; select_tuner( bktr, PHILIPS_FR1216_PAL ); goto checkDBX; default : kprintf("%s: Warning - Unknown Hauppauge Tuner 0x%x\n", bktr_name(bktr), tuner_code); } } break; case CARD_AVER_MEDIA: /* AVerMedia kindly supplied some details of their EEPROM contents * which allow us to auto select the Tuner Type. * Only the newer AVerMedia cards actually have an EEPROM. */ if (bktr->card.eepromAddr != 0) { u_char tuner_make; /* Eg Philips, Temic */ u_char tuner_tv_fm; /* TV or TV with FM Radio */ u_char tuner_format; /* Eg NTSC, PAL, SECAM */ int tuner; int tuner_0_table[] = { PHILIPS_NTSC, PHILIPS_PAL, PHILIPS_PAL, PHILIPS_PAL, PHILIPS_PAL, PHILIPS_PAL, PHILIPS_SECAM, PHILIPS_SECAM, PHILIPS_SECAM, PHILIPS_PAL}; int tuner_0_fm_table[] = { PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL}; int tuner_1_table[] = { TEMIC_NTSC, TEMIC_PAL, TEMIC_PAL, TEMIC_PAL, TEMIC_PAL, TEMIC_PAL, TEMIC_SECAM, TEMIC_SECAM, TEMIC_SECAM, TEMIC_PAL}; /* Extract information from the EEPROM data */ readEEProm(bktr, 0, 128, (u_char *) &eeprom ); tuner_make = (eeprom[0x41] & 0x7); tuner_tv_fm = (eeprom[0x41] & 0x18) >> 3; tuner_format = (eeprom[0x42] & 0xf0) >> 4; /* Treat tuner make 0 (Philips) and make 2 (LG) the same */ if ( ((tuner_make == 0) || (tuner_make == 2)) && (tuner_format <= 9) && (tuner_tv_fm == 0) ) { tuner = tuner_0_table[tuner_format]; select_tuner( bktr, tuner ); goto checkDBX; } if ( ((tuner_make == 0) || (tuner_make == 2)) && (tuner_format <= 9) && (tuner_tv_fm == 1) ) { tuner = tuner_0_fm_table[tuner_format]; select_tuner( bktr, tuner ); goto checkDBX; } if ( (tuner_make == 1) && (tuner_format <= 9) ) { tuner = tuner_1_table[tuner_format]; select_tuner( bktr, tuner ); goto checkDBX; } kprintf("%s: Warning - Unknown AVerMedia Tuner Make %d Format %d\n", bktr_name(bktr), tuner_make, tuner_format); } break; case CARD_LEADTEK: #if defined(BKTR_SYSTEM_DEFAULT) && BKTR_SYSTEM_DEFAULT == BROOKTREE_PAL select_tuner( bktr, PHILIPS_FR1216_PAL ); #else select_tuner( bktr, PHILIPS_FR1236_NTSC ); #endif goto checkDBX; break; case CARD_IO_BCTV3: select_tuner( bktr, ALPS_TSCH5 ); /* ALPS_TSCH6, in fact. */ goto checkDBX; break; case CARD_TERRATVALUE: select_tuner( bktr, PHILIPS_PAL); /* Phlips PAL tuner */ goto checkDBX; break; } /* end switch(card) */ /* At this point, a goto checkDBX has not occured */ /* We have not been able to select a Tuner */ /* Some cards make use of the tuner address to */ /* identify the make/model of tuner */ /* At address 0xc0/0xc1 we often find a TEMIC NTSC */ if ( i2cRead( bktr, 0xc1 ) != ABSENT ) { select_tuner( bktr, TEMIC_NTSC ); goto checkDBX; } /* At address 0xc6/0xc7 we often find a PHILIPS NTSC Tuner */ if ( i2cRead( bktr, 0xc7 ) != ABSENT ) { select_tuner( bktr, PHILIPS_NTSC ); goto checkDBX; } /* Address 0xc2/0xc3 is default (or common address) for several */ /* tuners and we cannot tell which is which. */ /* And for all other tuner i2c addresses, select the default */ select_tuner( bktr, DEFAULT_TUNER ); checkDBX: #if defined( BKTR_OVERRIDE_DBX ) bktr->card.dbx = BKTR_OVERRIDE_DBX; goto checkMSP; #endif /* Check for i2c devices */ if (!any_i2c_devices) { goto checkMSP; } /* probe for BTSC (dbx) chip */ if ( i2cRead( bktr, TDA9850_RADDR ) != ABSENT ) bktr->card.dbx = 1; checkMSP: /* If this is a Hauppauge Bt878 card, we need to enable the * MSP 34xx audio chip. * If this is a Hauppauge Bt848 card, reset the MSP device. * The MSP reset line is wired to GPIO pin 5. On Bt878 cards a pulldown * resistor holds the device in reset until we set GPIO pin 5. */ /* Optionally skip the MSP reset. This is handy if you initialise the * MSP audio in another operating system (eg Windows) first and then * do a soft reboot. */ #ifndef BKTR_NO_MSP_RESET if (card == CARD_HAUPPAUGE) { OUTL(bktr, BKTR_GPIO_OUT_EN, INL(bktr, BKTR_GPIO_OUT_EN) | (1<<5)); OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */ DELAY(2500); /* wait 2.5ms */ OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) & ~(1<<5)); /* write '0' */ DELAY(2500); /* wait 2.5ms */ OUTL(bktr, BKTR_GPIO_DATA, INL(bktr, BKTR_GPIO_DATA) | (1<<5)); /* write '1' */ DELAY(2500); /* wait 2.5ms */ } #endif #if defined( BKTR_OVERRIDE_MSP ) bktr->card.msp3400c = BKTR_OVERRIDE_MSP; goto checkMSPEnd; #endif /* Check for i2c devices */ if (!any_i2c_devices) { goto checkMSPEnd; } if ( i2cRead( bktr, MSP3400C_RADDR ) != ABSENT ) { bktr->card.msp3400c = 1; } checkMSPEnd: if (bktr->card.msp3400c) { bktr->msp_addr = MSP3400C_WADDR; msp_read_id( bktr ); kprintf("%s: Detected a MSP%s at 0x%x\n", bktr_name(bktr), bktr->msp_version_string, bktr->msp_addr); } /* Check for Dolby Surround Sound DPL3518A sound chip */ if ( i2cRead( bktr, DPL3518A_RADDR ) != ABSENT ) { bktr->card.dpl3518a = 1; } if (bktr->card.dpl3518a) { bktr->dpl_addr = DPL3518A_WADDR; dpl_read_id( bktr ); kprintf("%s: Detected a DPL%s at 0x%x\n", bktr_name(bktr), bktr->dpl_version_string, bktr->dpl_addr); } /* Start of Check Remote */ /* Check for the Hauppauge IR Remote Control */ /* If there is an external unit, the internal will be ignored */ bktr->remote_control = 0; /* initial value */ if (any_i2c_devices) { if (i2cRead( bktr, HAUP_REMOTE_EXT_RADDR ) != ABSENT ) { bktr->remote_control = 1; bktr->remote_control_addr = HAUP_REMOTE_EXT_RADDR; } else if (i2cRead( bktr, HAUP_REMOTE_INT_RADDR ) != ABSENT ) { bktr->remote_control = 1; bktr->remote_control_addr = HAUP_REMOTE_INT_RADDR; } } /* If a remote control is found, poll it 5 times to turn off the LED */ if (bktr->remote_control) { int i; for (i=0; i<5; i++) i2cRead( bktr, bktr->remote_control_addr ); } /* End of Check Remote */ #if defined( BKTR_USE_PLL ) bktr->xtal_pll_mode = BT848_USE_PLL; goto checkPLLEnd; #endif /* Default is to use XTALS and not PLL mode */ bktr->xtal_pll_mode = BT848_USE_XTALS; /* Enable PLL mode for OSPREY users */ if (card == CARD_OSPREY) bktr->xtal_pll_mode = BT848_USE_PLL; /* Enable PLL mode for Video Highway Xtreme users */ if (card == CARD_VIDEO_HIGHWAY_XTREME) bktr->xtal_pll_mode = BT848_USE_PLL; /* Most (perhaps all) Bt878 cards need to be switched to PLL mode */ /* as they only fit the NTSC crystal to their cards */ /* Default to enabling PLL mode for all Bt878/879 cards */ if ((bktr->id==BROOKTREE_878 || bktr->id==BROOKTREE_879) ) bktr->xtal_pll_mode = BT848_USE_PLL; #if defined( BKTR_USE_PLL ) checkPLLEnd: #endif bktr->card.tuner_pllAddr = tuner_i2c_address; if ( verbose ) { kprintf( "%s: %s", bktr_name(bktr), bktr->card.name ); if ( bktr->card.tuner ) kprintf( ", %s tuner", bktr->card.tuner->name ); if ( bktr->card.dbx ) kprintf( ", dbx stereo" ); if ( bktr->card.msp3400c ) kprintf( ", msp3400c stereo" ); if ( bktr->card.dpl3518a ) kprintf( ", dpl3518a dolby" ); if ( bktr->remote_control ) kprintf( ", remote control" ); kprintf( ".\n" ); } } #undef ABSENT |