sys/dev/raid/mlx/mlx.c
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 | /*- * Copyright (c) 1999 Michael Smith * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/mlx/mlx.c,v 1.14.2.5 2001/09/11 09:49:53 kris Exp $ */ /* * Driver for the Mylex DAC960 family of RAID controllers. */ #include <sys/param.h> #include <sys/systm.h> #include <sys/malloc.h> #include <sys/kernel.h> #include <sys/bus.h> #include <sys/conf.h> #include <sys/devicestat.h> #include <sys/disk.h> #include <sys/stat.h> #include <sys/rman.h> #include <sys/thread2.h> #include <machine/clock.h> #include "mlx_compat.h" #include "mlxio.h" #include "mlxvar.h" #include "mlxreg.h" static struct dev_ops mlx_ops = { { "mlx", 0, 0 }, .d_open = mlx_open, .d_close = mlx_close, .d_ioctl = mlx_ioctl, }; devclass_t mlx_devclass; /* * Per-interface accessor methods */ static int mlx_v3_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); static int mlx_v3_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); static void mlx_v3_intaction(struct mlx_softc *sc, int action); static int mlx_v3_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); static int mlx_v4_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); static int mlx_v4_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); static void mlx_v4_intaction(struct mlx_softc *sc, int action); static int mlx_v4_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); static int mlx_v5_tryqueue(struct mlx_softc *sc, struct mlx_command *mc); static int mlx_v5_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); static void mlx_v5_intaction(struct mlx_softc *sc, int action); static int mlx_v5_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2); /* * Status monitoring */ static void mlx_periodic(void *data); static void mlx_periodic_enquiry(struct mlx_command *mc); static void mlx_periodic_eventlog_poll(struct mlx_softc *sc); static void mlx_periodic_eventlog_respond(struct mlx_command *mc); static void mlx_periodic_rebuild(struct mlx_command *mc); /* * Channel Pause */ static void mlx_pause_action(struct mlx_softc *sc); static void mlx_pause_done(struct mlx_command *mc); /* * Command submission. */ static void *mlx_enquire(struct mlx_softc *sc, int command, size_t bufsize, void (*complete)(struct mlx_command *mc)); static int mlx_flush(struct mlx_softc *sc); static int mlx_check(struct mlx_softc *sc, int drive); static int mlx_rebuild(struct mlx_softc *sc, int channel, int target); static int mlx_wait_command(struct mlx_command *mc); static int mlx_poll_command(struct mlx_command *mc); static void mlx_startio(struct mlx_softc *sc); static void mlx_completeio(struct mlx_command *mc); static int mlx_user_command(struct mlx_softc *sc, struct mlx_usercommand *mu); /* * Command buffer allocation. */ static struct mlx_command *mlx_alloccmd(struct mlx_softc *sc); static void mlx_releasecmd(struct mlx_command *mc); static void mlx_freecmd(struct mlx_command *mc); /* * Command management. */ static int mlx_getslot(struct mlx_command *mc); static void mlx_mapcmd(struct mlx_command *mc); static void mlx_unmapcmd(struct mlx_command *mc); static int mlx_start(struct mlx_command *mc); static int mlx_done(struct mlx_softc *sc); static void mlx_complete(struct mlx_softc *sc); /* * Debugging. */ static char *mlx_diagnose_command(struct mlx_command *mc); static void mlx_describe_controller(struct mlx_softc *sc); static int mlx_fw_message(struct mlx_softc *sc, int status, int param1, int param2); /* * Utility functions. */ static struct mlx_sysdrive *mlx_findunit(struct mlx_softc *sc, int unit); /******************************************************************************** ******************************************************************************** Public Interfaces ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Free all of the resources associated with (sc) * * Should not be called if the controller is active. */ void mlx_free(struct mlx_softc *sc) { struct mlx_command *mc; debug_called(1); /* cancel status timeout */ callout_stop(&sc->mlx_timeout); /* throw away any command buffers */ while ((mc = TAILQ_FIRST(&sc->mlx_freecmds)) != NULL) { TAILQ_REMOVE(&sc->mlx_freecmds, mc, mc_link); mlx_freecmd(mc); } /* destroy data-transfer DMA tag */ if (sc->mlx_buffer_dmat) bus_dma_tag_destroy(sc->mlx_buffer_dmat); /* free and destroy DMA memory and tag for s/g lists */ if (sc->mlx_sgtable) bus_dmamem_free(sc->mlx_sg_dmat, sc->mlx_sgtable, sc->mlx_sg_dmamap); if (sc->mlx_sg_dmat) bus_dma_tag_destroy(sc->mlx_sg_dmat); /* disconnect the interrupt handler */ if (sc->mlx_intr) bus_teardown_intr(sc->mlx_dev, sc->mlx_irq, sc->mlx_intr); if (sc->mlx_irq != NULL) bus_release_resource(sc->mlx_dev, SYS_RES_IRQ, 0, sc->mlx_irq); /* destroy the parent DMA tag */ if (sc->mlx_parent_dmat) bus_dma_tag_destroy(sc->mlx_parent_dmat); /* release the register window mapping */ if (sc->mlx_mem != NULL) bus_release_resource(sc->mlx_dev, sc->mlx_mem_type, sc->mlx_mem_rid, sc->mlx_mem); /* free controller enquiry data */ if (sc->mlx_enq2 != NULL) kfree(sc->mlx_enq2, M_DEVBUF); dev_ops_remove_minor(&mlx_ops, device_get_unit(sc->mlx_dev)); } /******************************************************************************** * Map the scatter/gather table into bus space */ static void mlx_dma_map_sg(void *arg, bus_dma_segment_t *segs, int nseg, int error) { struct mlx_softc *sc = (struct mlx_softc *)arg; debug_called(1); /* save base of s/g table's address in bus space */ sc->mlx_sgbusaddr = segs->ds_addr; } static int mlx_sglist_map(struct mlx_softc *sc) { size_t segsize; int error, ncmd; debug_called(1); /* destroy any existing mappings */ if (sc->mlx_sgtable) bus_dmamem_free(sc->mlx_sg_dmat, sc->mlx_sgtable, sc->mlx_sg_dmamap); if (sc->mlx_sg_dmat) bus_dma_tag_destroy(sc->mlx_sg_dmat); /* * Create a single tag describing a region large enough to hold all of * the s/g lists we will need. If we're called early on, we don't know how * many commands we're going to be asked to support, so only allocate enough * for a couple. */ if (sc->mlx_enq2 == NULL) { ncmd = 2; } else { ncmd = sc->mlx_enq2->me_max_commands; } segsize = sizeof(struct mlx_sgentry) * MLX_NSEG * ncmd; error = bus_dma_tag_create(sc->mlx_parent_dmat, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ segsize, 1, /* maxsize, nsegments */ BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 0, /* flags */ &sc->mlx_sg_dmat); if (error != 0) { device_printf(sc->mlx_dev, "can't allocate scatter/gather DMA tag\n"); return(ENOMEM); } /* * Allocate enough s/g maps for all commands and permanently map them into * controller-visible space. * * XXX this assumes we can get enough space for all the s/g maps in one * contiguous slab. We may need to switch to a more complex arrangement where * we allocate in smaller chunks and keep a lookup table from slot to bus address. */ error = bus_dmamem_alloc(sc->mlx_sg_dmat, (void *)&sc->mlx_sgtable, BUS_DMA_NOWAIT, &sc->mlx_sg_dmamap); if (error) { device_printf(sc->mlx_dev, "can't allocate s/g table\n"); return(ENOMEM); } bus_dmamap_load(sc->mlx_sg_dmat, sc->mlx_sg_dmamap, sc->mlx_sgtable, segsize, mlx_dma_map_sg, sc, 0); return(0); } /******************************************************************************** * Initialise the controller and softc */ int mlx_attach(struct mlx_softc *sc) { struct mlx_enquiry_old *meo; int rid, error, fwminor, hscode, hserror, hsparam1, hsparam2, hsmsg; debug_called(1); callout_init(&sc->mlx_timeout); /* * Initialise per-controller queues. */ TAILQ_INIT(&sc->mlx_work); TAILQ_INIT(&sc->mlx_freecmds); bioq_init(&sc->mlx_bioq); /* * Select accessor methods based on controller interface type. */ switch(sc->mlx_iftype) { case MLX_IFTYPE_2: case MLX_IFTYPE_3: sc->mlx_tryqueue = mlx_v3_tryqueue; sc->mlx_findcomplete = mlx_v3_findcomplete; sc->mlx_intaction = mlx_v3_intaction; sc->mlx_fw_handshake = mlx_v3_fw_handshake; break; case MLX_IFTYPE_4: sc->mlx_tryqueue = mlx_v4_tryqueue; sc->mlx_findcomplete = mlx_v4_findcomplete; sc->mlx_intaction = mlx_v4_intaction; sc->mlx_fw_handshake = mlx_v4_fw_handshake; break; case MLX_IFTYPE_5: sc->mlx_tryqueue = mlx_v5_tryqueue; sc->mlx_findcomplete = mlx_v5_findcomplete; sc->mlx_intaction = mlx_v5_intaction; sc->mlx_fw_handshake = mlx_v5_fw_handshake; break; default: mlx_free(sc); return(ENXIO); /* should never happen */ } /* disable interrupts before we start talking to the controller */ sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); /* * Wait for the controller to come ready, handshake with the firmware if required. * This is typically only necessary on platforms where the controller BIOS does not * run. */ hsmsg = 0; DELAY(1000); while ((hscode = sc->mlx_fw_handshake(sc, &hserror, &hsparam1, &hsparam2)) != 0) { /* report first time around... */ if (hsmsg == 0) { device_printf(sc->mlx_dev, "controller initialisation in progress...\n"); hsmsg = 1; } /* did we get a real message? */ if (hscode == 2) { hscode = mlx_fw_message(sc, hserror, hsparam1, hsparam2); /* fatal initialisation error? */ if (hscode != 0) { mlx_free(sc); return(ENXIO); } } } if (hsmsg == 1) device_printf(sc->mlx_dev, "initialisation complete.\n"); /* * Allocate and connect our interrupt. */ rid = 0; sc->mlx_irq = bus_alloc_resource(sc->mlx_dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->mlx_irq == NULL) { device_printf(sc->mlx_dev, "can't allocate interrupt\n"); mlx_free(sc); return(ENXIO); } error = bus_setup_intr(sc->mlx_dev, sc->mlx_irq, 0, mlx_intr, sc, &sc->mlx_intr, NULL); if (error) { device_printf(sc->mlx_dev, "can't set up interrupt\n"); mlx_free(sc); return(ENXIO); } /* * Create DMA tag for mapping buffers into controller-addressable space. */ error = bus_dma_tag_create(sc->mlx_parent_dmat, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ MAXBSIZE, MLX_NSEG, /* maxsize, nsegments */ BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */ 0, /* flags */ &sc->mlx_buffer_dmat); if (error != 0) { device_printf(sc->mlx_dev, "can't allocate buffer DMA tag\n"); mlx_free(sc); return(ENOMEM); } /* * Create some initial scatter/gather mappings so we can run the probe commands. */ error = mlx_sglist_map(sc); if (error != 0) { device_printf(sc->mlx_dev, "can't make initial s/g list mapping\n"); mlx_free(sc); return(error); } /* * We don't (yet) know where the event log is up to. */ sc->mlx_currevent = -1; /* * Obtain controller feature information */ if ((sc->mlx_enq2 = mlx_enquire(sc, MLX_CMD_ENQUIRY2, sizeof(struct mlx_enquiry2), NULL)) == NULL) { device_printf(sc->mlx_dev, "ENQUIRY2 failed\n"); mlx_free(sc); return(ENXIO); } /* * Do quirk/feature related things. */ fwminor = (sc->mlx_enq2->me_firmware_id >> 8) & 0xff; switch(sc->mlx_iftype) { case MLX_IFTYPE_2: /* These controllers don't report the firmware version in the ENQUIRY2 response */ if ((meo = mlx_enquire(sc, MLX_CMD_ENQUIRY_OLD, sizeof(struct mlx_enquiry_old), NULL)) == NULL) { device_printf(sc->mlx_dev, "ENQUIRY_OLD failed\n"); mlx_free(sc); return(ENXIO); } sc->mlx_enq2->me_firmware_id = ('0' << 24) | (0 << 16) | (meo->me_fwminor << 8) | meo->me_fwmajor; /* XXX require 2.42 or better (PCI) or 2.14 or better (EISA) */ if (meo->me_fwminor < 42) { device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); device_printf(sc->mlx_dev, " *** WARNING *** Use revision 2.42 or later\n"); } kfree(meo, M_DEVBUF); break; case MLX_IFTYPE_3: /* XXX certify 3.52? */ if (fwminor < 51) { device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); device_printf(sc->mlx_dev, " *** WARNING *** Use revision 3.51 or later\n"); } break; case MLX_IFTYPE_4: /* XXX certify firmware versions? */ if (fwminor < 6) { device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); device_printf(sc->mlx_dev, " *** WARNING *** Use revision 4.06 or later\n"); } break; case MLX_IFTYPE_5: if (fwminor < 7) { device_printf(sc->mlx_dev, " *** WARNING *** This firmware revision is not recommended\n"); device_printf(sc->mlx_dev, " *** WARNING *** Use revision 5.07 or later\n"); } break; default: mlx_free(sc); return(ENXIO); /* should never happen */ } /* * Create the final scatter/gather mappings now that we have characterised the controller. */ error = mlx_sglist_map(sc); if (error != 0) { device_printf(sc->mlx_dev, "can't make final s/g list mapping\n"); mlx_free(sc); return(error); } /* * No user-requested background operation is in progress. */ sc->mlx_background = 0; sc->mlx_rebuildstat.rs_code = MLX_REBUILDSTAT_IDLE; /* * Create the control device. */ make_dev(&mlx_ops, device_get_unit(sc->mlx_dev), UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR, "mlx%d", device_get_unit(sc->mlx_dev)); /* * Start the timeout routine. */ callout_reset(&sc->mlx_timeout, hz, mlx_periodic, sc); /* print a little information about the controller */ mlx_describe_controller(sc); return(0); } /******************************************************************************** * Locate disk resources and attach children to them. */ void mlx_startup(struct mlx_softc *sc) { struct mlx_enq_sys_drive *mes; struct mlx_sysdrive *dr; int i, error; debug_called(1); /* * Scan all the system drives and attach children for those that * don't currently have them. */ mes = mlx_enquire(sc, MLX_CMD_ENQSYSDRIVE, sizeof(*mes) * MLX_MAXDRIVES, NULL); if (mes == NULL) { device_printf(sc->mlx_dev, "error fetching drive status\n"); return; } /* iterate over drives returned */ for (i = 0, dr = &sc->mlx_sysdrive[0]; (i < MLX_MAXDRIVES) && (mes[i].sd_size != 0xffffffff); i++, dr++) { /* are we already attached to this drive? */ if (dr->ms_disk == NULL) { /* pick up drive information */ dr->ms_size = mes[i].sd_size; dr->ms_raidlevel = mes[i].sd_raidlevel & 0xf; dr->ms_state = mes[i].sd_state; /* generate geometry information */ if (sc->mlx_geom == MLX_GEOM_128_32) { dr->ms_heads = 128; dr->ms_sectors = 32; dr->ms_cylinders = dr->ms_size / (128 * 32); } else { /* MLX_GEOM_255/63 */ dr->ms_heads = 255; dr->ms_sectors = 63; dr->ms_cylinders = dr->ms_size / (255 * 63); } dr->ms_disk = device_add_child(sc->mlx_dev, /*"mlxd"*/NULL, -1); if (dr->ms_disk == NULL) device_printf(sc->mlx_dev, "device_add_child failed\n"); device_set_ivars(dr->ms_disk, dr); } } kfree(mes, M_DEVBUF); if ((error = bus_generic_attach(sc->mlx_dev)) != 0) device_printf(sc->mlx_dev, "bus_generic_attach returned %d", error); /* mark controller back up */ sc->mlx_state &= ~MLX_STATE_SHUTDOWN; /* enable interrupts */ sc->mlx_intaction(sc, MLX_INTACTION_ENABLE); } /******************************************************************************** * Disconnect from the controller completely, in preparation for unload. */ int mlx_detach(device_t dev) { struct mlx_softc *sc = device_get_softc(dev); struct mlxd_softc *mlxd; int i, error; debug_called(1); error = EBUSY; crit_enter(); if (sc->mlx_state & MLX_STATE_OPEN) goto out; for (i = 0; i < MLX_MAXDRIVES; i++) { if (sc->mlx_sysdrive[i].ms_disk != NULL) { mlxd = device_get_softc(sc->mlx_sysdrive[i].ms_disk); if (mlxd->mlxd_flags & MLXD_OPEN) { /* drive is mounted, abort detach */ device_printf(sc->mlx_sysdrive[i].ms_disk, "still open, can't detach\n"); goto out; } } } if ((error = mlx_shutdown(dev))) goto out; mlx_free(sc); error = 0; out: crit_exit(); return(error); } /******************************************************************************** * Bring the controller down to a dormant state and detach all child devices. * * This function is called before detach, system shutdown, or before performing * an operation which may add or delete system disks. (Call mlx_startup to * resume normal operation.) * * Note that we can assume that the bioq on the controller is empty, as we won't * allow shutdown if any device is open. */ int mlx_shutdown(device_t dev) { struct mlx_softc *sc = device_get_softc(dev); int i, error; debug_called(1); crit_enter(); error = 0; sc->mlx_state |= MLX_STATE_SHUTDOWN; sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); /* flush controller */ device_printf(sc->mlx_dev, "flushing cache..."); if (mlx_flush(sc)) { kprintf("failed\n"); } else { kprintf("done\n"); } /* delete all our child devices */ for (i = 0; i < MLX_MAXDRIVES; i++) { if (sc->mlx_sysdrive[i].ms_disk != NULL) { if ((error = device_delete_child(sc->mlx_dev, sc->mlx_sysdrive[i].ms_disk)) != 0) goto out; sc->mlx_sysdrive[i].ms_disk = NULL; } } out: crit_exit(); return(error); } /******************************************************************************** * Bring the controller to a quiescent state, ready for system suspend. */ int mlx_suspend(device_t dev) { struct mlx_softc *sc = device_get_softc(dev); debug_called(1); crit_enter(); sc->mlx_state |= MLX_STATE_SUSPEND; /* flush controller */ device_printf(sc->mlx_dev, "flushing cache..."); kprintf("%s\n", mlx_flush(sc) ? "failed" : "done"); sc->mlx_intaction(sc, MLX_INTACTION_DISABLE); crit_exit(); return(0); } /******************************************************************************** * Bring the controller back to a state ready for operation. */ int mlx_resume(device_t dev) { struct mlx_softc *sc = device_get_softc(dev); debug_called(1); sc->mlx_state &= ~MLX_STATE_SUSPEND; sc->mlx_intaction(sc, MLX_INTACTION_ENABLE); return(0); } /******************************************************************************* * Take an interrupt, or be poked by other code to look for interrupt-worthy * status. */ void mlx_intr(void *arg) { struct mlx_softc *sc = (struct mlx_softc *)arg; debug_called(1); /* collect finished commands, queue anything waiting */ mlx_done(sc); } /******************************************************************************* * Receive a buf structure from a child device and queue it on a particular * disk resource, then poke the disk resource to start as much work as it can. */ int mlx_submit_bio(struct mlx_softc *sc, struct bio *bio) { debug_called(1); crit_enter(); bioqdisksort(&sc->mlx_bioq, bio); sc->mlx_waitbufs++; crit_exit(); mlx_startio(sc); return(0); } /******************************************************************************** * Accept an open operation on the control device. */ int mlx_open(struct dev_open_args *ap) { cdev_t dev = ap->a_head.a_dev; int unit = minor(dev); struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); sc->mlx_state |= MLX_STATE_OPEN; return(0); } /******************************************************************************** * Accept the last close on the control device. */ int mlx_close(struct dev_close_args *ap) { cdev_t dev = ap->a_head.a_dev; int unit = minor(dev); struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); sc->mlx_state &= ~MLX_STATE_OPEN; return (0); } /******************************************************************************** * Handle controller-specific control operations. */ int mlx_ioctl(struct dev_ioctl_args *ap) { cdev_t dev = ap->a_head.a_dev; int unit = minor(dev); struct mlx_softc *sc = devclass_get_softc(mlx_devclass, unit); struct mlx_rebuild_request *rb = (struct mlx_rebuild_request *)ap->a_data; struct mlx_rebuild_status *rs = (struct mlx_rebuild_status *)ap->a_data; int *arg = (int *)ap->a_data; struct mlx_pause *mp; struct mlx_sysdrive *dr; struct mlxd_softc *mlxd; int i, error; switch(ap->a_cmd) { /* * Enumerate connected system drives; returns the first system drive's * unit number if *arg is -1, or the next unit after *arg if it's * a valid unit on this controller. */ case MLX_NEXT_CHILD: /* search system drives */ for (i = 0; i < MLX_MAXDRIVES; i++) { /* is this one attached? */ if (sc->mlx_sysdrive[i].ms_disk != NULL) { /* looking for the next one we come across? */ if (*arg == -1) { *arg = device_get_unit(sc->mlx_sysdrive[0].ms_disk); return(0); } /* we want the one after this one */ if (*arg == device_get_unit(sc->mlx_sysdrive[i].ms_disk)) *arg = -1; } } return(ENOENT); /* * Scan the controller to see whether new drives have appeared. */ case MLX_RESCAN_DRIVES: mlx_startup(sc); return(0); /* * Disconnect from the specified drive; it may be about to go * away. */ case MLX_DETACH_DRIVE: /* detach one drive */ if (((dr = mlx_findunit(sc, *arg)) == NULL) || ((mlxd = device_get_softc(dr->ms_disk)) == NULL)) return(ENOENT); device_printf(dr->ms_disk, "detaching..."); error = 0; if (mlxd->mlxd_flags & MLXD_OPEN) { error = EBUSY; goto detach_out; } /* flush controller */ if (mlx_flush(sc)) { error = EBUSY; goto detach_out; } /* nuke drive */ if ((error = device_delete_child(sc->mlx_dev, dr->ms_disk)) != 0) goto detach_out; dr->ms_disk = NULL; detach_out: if (error) { kprintf("failed\n"); } else { kprintf("done\n"); } return(error); /* * Pause one or more SCSI channels for a period of time, to assist * in the process of hot-swapping devices. * * Note that at least the 3.51 firmware on the DAC960PL doesn't seem * to do this right. */ case MLX_PAUSE_CHANNEL: /* schedule a channel pause */ /* Does this command work on this firmware? */ if (!(sc->mlx_feature & MLX_FEAT_PAUSEWORKS)) return(EOPNOTSUPP); mp = (struct mlx_pause *)ap->a_data; if ((mp->mp_which == MLX_PAUSE_CANCEL) && (sc->mlx_pause.mp_when != 0)) { /* cancel a pending pause operation */ sc->mlx_pause.mp_which = 0; } else { /* fix for legal channels */ mp->mp_which &= ((1 << sc->mlx_enq2->me_actual_channels) -1); /* check time values */ if ((mp->mp_when < 0) || (mp->mp_when > 3600)) return(EINVAL); if ((mp->mp_howlong < 1) || (mp->mp_howlong > (0xf * 30))) return(EINVAL); /* check for a pause currently running */ if ((sc->mlx_pause.mp_which != 0) && (sc->mlx_pause.mp_when == 0)) return(EBUSY); /* looks ok, go with it */ sc->mlx_pause.mp_which = mp->mp_which; sc->mlx_pause.mp_when = time_uptime + mp->mp_when; sc->mlx_pause.mp_howlong = sc->mlx_pause.mp_when + mp->mp_howlong; } return(0); /* * Accept a command passthrough-style. */ case MLX_COMMAND: return(mlx_user_command(sc, (struct mlx_usercommand *)ap->a_data)); /* * Start a rebuild on a given SCSI disk */ case MLX_REBUILDASYNC: if (sc->mlx_background != 0) { rb->rr_status = 0x0106; return(EBUSY); } rb->rr_status = mlx_rebuild(sc, rb->rr_channel, rb->rr_target); switch (rb->rr_status) { case 0: error = 0; break; case 0x10000: error = ENOMEM; /* couldn't set up the command */ break; case 0x0002: error = EBUSY; break; case 0x0104: error = EIO; break; case 0x0105: error = ERANGE; break; case 0x0106: error = EBUSY; break; default: error = EINVAL; break; } if (error == 0) sc->mlx_background = MLX_BACKGROUND_REBUILD; return(error); /* * Get the status of the current rebuild or consistency check. */ case MLX_REBUILDSTAT: *rs = sc->mlx_rebuildstat; return(0); /* * Return the per-controller system drive number matching the * disk device number in (arg), if it happens to belong to us. */ case MLX_GET_SYSDRIVE: error = ENOENT; mlxd = (struct mlxd_softc *)devclass_get_softc(mlxd_devclass, *arg); if ((mlxd != NULL) && (mlxd->mlxd_drive >= sc->mlx_sysdrive) && (mlxd->mlxd_drive < (sc->mlx_sysdrive + MLX_MAXDRIVES))) { error = 0; *arg = mlxd->mlxd_drive - sc->mlx_sysdrive; } return(error); default: return(ENOTTY); } } /******************************************************************************** * Handle operations requested by a System Drive connected to this controller. */ int mlx_submit_ioctl(struct mlx_softc *sc, struct mlx_sysdrive *drive, u_long cmd, caddr_t addr, int32_t flag) { int *arg = (int *)addr; int error, result; switch(cmd) { /* * Return the current status of this drive. */ case MLXD_STATUS: *arg = drive->ms_state; return(0); /* * Start a background consistency check on this drive. */ case MLXD_CHECKASYNC: /* start a background consistency check */ if (sc->mlx_background != 0) { *arg = 0x0106; return(EBUSY); } result = mlx_check(sc, drive - &sc->mlx_sysdrive[0]); switch (result) { case 0: error = 0; break; case 0x10000: error = ENOMEM; /* couldn't set up the command */ break; case 0x0002: error = EIO; break; case 0x0105: error = ERANGE; break; case 0x0106: error = EBUSY; break; default: error = EINVAL; break; } if (error == 0) sc->mlx_background = MLX_BACKGROUND_CHECK; *arg = result; return(error); } return(ENOIOCTL); } /******************************************************************************** ******************************************************************************** Status Monitoring ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Fire off commands to periodically check the status of connected drives. */ static void mlx_periodic(void *data) { struct mlx_softc *sc = (struct mlx_softc *)data; debug_called(1); /* * Run a bus pause? */ if ((sc->mlx_pause.mp_which != 0) && (sc->mlx_pause.mp_when > 0) && (time_uptime >= sc->mlx_pause.mp_when)){ mlx_pause_action(sc); /* pause is running */ sc->mlx_pause.mp_when = 0; sysbeep(500, hz); /* * Bus pause still running? */ } else if ((sc->mlx_pause.mp_which != 0) && (sc->mlx_pause.mp_when == 0)) { /* time to stop bus pause? */ if (time_uptime >= sc->mlx_pause.mp_howlong) { mlx_pause_action(sc); sc->mlx_pause.mp_which = 0; /* pause is complete */ sysbeep(500, hz); } else { sysbeep((time_uptime % 5) * 100 + 500, hz/8); } /* * Run normal periodic activities? */ } else if (time_uptime > (sc->mlx_lastpoll + 10)) { sc->mlx_lastpoll = time_uptime; /* * Check controller status. * * XXX Note that this may not actually launch a command in situations of high load. */ mlx_enquire(sc, (sc->mlx_iftype == MLX_IFTYPE_2) ? MLX_CMD_ENQUIRY_OLD : MLX_CMD_ENQUIRY, imax(sizeof(struct mlx_enquiry), sizeof(struct mlx_enquiry_old)), mlx_periodic_enquiry); /* * Check system drive status. * * XXX This might be better left to event-driven detection, eg. I/O to an offline * drive will detect it's offline, rebuilds etc. should detect the drive is back * online. */ mlx_enquire(sc, MLX_CMD_ENQSYSDRIVE, sizeof(struct mlx_enq_sys_drive) * MLX_MAXDRIVES, mlx_periodic_enquiry); } /* get drive rebuild/check status */ /* XXX should check sc->mlx_background if this is only valid while in progress */ mlx_enquire(sc, MLX_CMD_REBUILDSTAT, sizeof(struct mlx_rebuild_stat), mlx_periodic_rebuild); /* deal with possibly-missed interrupts and timed-out commands */ mlx_done(sc); /* reschedule another poll next second or so */ callout_reset(&sc->mlx_timeout, hz, mlx_periodic, sc); } /******************************************************************************** * Handle the result of an ENQUIRY command instigated by periodic status polling. */ static void mlx_periodic_enquiry(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; debug_called(1); /* Command completed OK? */ if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "periodic enquiry failed - %s\n", mlx_diagnose_command(mc)); goto out; } /* respond to command */ switch(mc->mc_mailbox[0]) { /* * This is currently a bit fruitless, as we don't know how to extract the eventlog * pointer yet. */ case MLX_CMD_ENQUIRY_OLD: { struct mlx_enquiry *me = (struct mlx_enquiry *)mc->mc_data; struct mlx_enquiry_old *meo = (struct mlx_enquiry_old *)mc->mc_data; int i; /* convert data in-place to new format */ for (i = NELEM(me->me_dead) - 1; i >= 0; i--) { me->me_dead[i].dd_chan = meo->me_dead[i].dd_chan; me->me_dead[i].dd_targ = meo->me_dead[i].dd_targ; } me->me_misc_flags = 0; me->me_rebuild_count = meo->me_rebuild_count; me->me_dead_count = meo->me_dead_count; me->me_critical_sd_count = meo->me_critical_sd_count; me->me_event_log_seq_num = 0; me->me_offline_sd_count = meo->me_offline_sd_count; me->me_max_commands = meo->me_max_commands; me->me_rebuild_flag = meo->me_rebuild_flag; me->me_fwmajor = meo->me_fwmajor; me->me_fwminor = meo->me_fwminor; me->me_status_flags = meo->me_status_flags; me->me_flash_age = meo->me_flash_age; for (i = NELEM(me->me_drvsize) - 1; i >= 0; i--) { if (i > (NELEM(meo->me_drvsize) - 1)) { me->me_drvsize[i] = 0; /* drive beyond supported range */ } else { me->me_drvsize[i] = meo->me_drvsize[i]; } } me->me_num_sys_drvs = meo->me_num_sys_drvs; } /* FALLTHROUGH */ /* * Generic controller status update. We could do more with this than just * checking the event log. */ case MLX_CMD_ENQUIRY: { struct mlx_enquiry *me = (struct mlx_enquiry *)mc->mc_data; if (sc->mlx_currevent == -1) { /* initialise our view of the event log */ sc->mlx_currevent = sc->mlx_lastevent = me->me_event_log_seq_num; } else if ((me->me_event_log_seq_num != sc->mlx_lastevent) && !(sc->mlx_flags & MLX_EVENTLOG_BUSY)) { /* record where current events are up to */ sc->mlx_currevent = me->me_event_log_seq_num; debug(1, "event log pointer was %d, now %d\n", sc->mlx_lastevent, sc->mlx_currevent); /* mark the event log as busy */ atomic_set_int(&sc->mlx_flags, MLX_EVENTLOG_BUSY); /* drain new eventlog entries */ mlx_periodic_eventlog_poll(sc); } break; } case MLX_CMD_ENQSYSDRIVE: { struct mlx_enq_sys_drive *mes = (struct mlx_enq_sys_drive *)mc->mc_data; struct mlx_sysdrive *dr; int i; for (i = 0, dr = &sc->mlx_sysdrive[0]; (i < MLX_MAXDRIVES) && (mes[i].sd_size != 0xffffffff); i++) { /* has state been changed by controller? */ if (dr->ms_state != mes[i].sd_state) { switch(mes[i].sd_state) { case MLX_SYSD_OFFLINE: device_printf(dr->ms_disk, "drive offline\n"); break; case MLX_SYSD_ONLINE: device_printf(dr->ms_disk, "drive online\n"); break; case MLX_SYSD_CRITICAL: device_printf(dr->ms_disk, "drive critical\n"); break; } /* save new state */ dr->ms_state = mes[i].sd_state; } } break; } default: device_printf(sc->mlx_dev, "%s: unknown command 0x%x", __func__, mc->mc_mailbox[0]); break; } out: kfree(mc->mc_data, M_DEVBUF); mlx_releasecmd(mc); } /******************************************************************************** * Instigate a poll for one event log message on (sc). * We only poll for one message at a time, to keep our command usage down. */ static void mlx_periodic_eventlog_poll(struct mlx_softc *sc) { struct mlx_command *mc; void *result = NULL; int error; debug_called(1); /* get ourselves a command buffer */ error = 1; if ((mc = mlx_alloccmd(sc)) == NULL) goto out; /* * allocate the response structure - sizeof(struct mlx_eventlog_entry)? * Called from timeout - use M_NOWAIT (repoll later on failure?) */ if ((result = kmalloc(1024, M_DEVBUF, M_NOWAIT)) == NULL) goto out; /* get a command slot */ if (mlx_getslot(mc)) goto out; /* map the command so the controller can see it */ mc->mc_data = result; mc->mc_length = /*sizeof(struct mlx_eventlog_entry)*/1024; mlx_mapcmd(mc); /* build the command to get one entry */ mlx_make_type3(mc, MLX_CMD_LOGOP, MLX_LOGOP_GET, 1, sc->mlx_lastevent, 0, 0, mc->mc_dataphys, 0); mc->mc_complete = mlx_periodic_eventlog_respond; mc->mc_private = mc; /* start the command */ if ((error = mlx_start(mc)) != 0) goto out; error = 0; /* success */ out: if (error != 0) { if (mc != NULL) mlx_releasecmd(mc); if (result != NULL) kfree(result, M_DEVBUF); } } /******************************************************************************** * Handle the result of polling for a log message, generate diagnostic output. * If this wasn't the last message waiting for us, we'll go collect another. */ static char *mlx_sense_messages[] = { "because write recovery failed", "because of SCSI bus reset failure", "because of double check condition", "because it was removed", "because of gross error on SCSI chip", "because of bad tag returned from drive", "because of timeout on SCSI command", "because of reset SCSI command issued from system", "because busy or parity error count exceeded limit", "because of 'kill drive' command from system", "because of selection timeout", "due to SCSI phase sequence error", "due to unknown status" }; static void mlx_periodic_eventlog_respond(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; struct mlx_eventlog_entry *el = (struct mlx_eventlog_entry *)mc->mc_data; char *reason; char hexstr[2][12]; debug_called(1); sc->mlx_lastevent++; /* next message... */ if (mc->mc_status == 0) { /* handle event log message */ switch(el->el_type) { /* * This is the only sort of message we understand at the moment. * The tests here are probably incomplete. */ case MLX_LOGMSG_SENSE: /* sense data */ /* Mylex vendor-specific message indicating a drive was killed? */ if ((el->el_sensekey == 9) && (el->el_asc == 0x80)) { if (el->el_asq < NELEM(mlx_sense_messages)) { reason = mlx_sense_messages[el->el_asq]; } else { reason = "for unknown reason"; } device_printf(sc->mlx_dev, "physical drive %d:%d killed %s\n", el->el_channel, el->el_target, reason); } /* SCSI drive was reset? */ if ((el->el_sensekey == 6) && (el->el_asc == 0x29)) { device_printf(sc->mlx_dev, "physical drive %d:%d reset\n", el->el_channel, el->el_target); } /* SCSI drive error? */ if (!((el->el_sensekey == 0) || ((el->el_sensekey == 2) && (el->el_asc == 0x04) && ((el->el_asq == 0x01) || (el->el_asq == 0x02))))) { device_printf(sc->mlx_dev, "physical drive %d:%d error log: sense = %d asc = %x asq = %x\n", el->el_channel, el->el_target, el->el_sensekey, el->el_asc, el->el_asq); device_printf(sc->mlx_dev, " info %s csi %s\n", hexncpy(el->el_information, 4, hexstr[0], 12, ":"), hexncpy(el->el_csi, 4, hexstr[1], 12, ":")); } break; default: device_printf(sc->mlx_dev, "unknown log message type 0x%x\n", el->el_type); break; } } else { device_printf(sc->mlx_dev, "error reading message log - %s\n", mlx_diagnose_command(mc)); /* give up on all the outstanding messages, as we may have come unsynched */ sc->mlx_lastevent = sc->mlx_currevent; } /* dispose of command and data */ kfree(mc->mc_data, M_DEVBUF); mlx_releasecmd(mc); /* is there another message to obtain? */ if (sc->mlx_lastevent != sc->mlx_currevent) { mlx_periodic_eventlog_poll(sc); } else { /* clear log-busy status */ atomic_clear_int(&sc->mlx_flags, MLX_EVENTLOG_BUSY); } } /******************************************************************************** * Handle check/rebuild operations in progress. */ static void mlx_periodic_rebuild(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; struct mlx_rebuild_status *mr = (struct mlx_rebuild_status *)mc->mc_data; switch(mc->mc_status) { case 0: /* operation running, update stats */ sc->mlx_rebuildstat = *mr; /* spontaneous rebuild/check? */ if (sc->mlx_background == 0) { sc->mlx_background = MLX_BACKGROUND_SPONTANEOUS; device_printf(sc->mlx_dev, "background check/rebuild operation started\n"); } break; case 0x0105: /* nothing running, finalise stats and report */ switch(sc->mlx_background) { case MLX_BACKGROUND_CHECK: device_printf(sc->mlx_dev, "consistency check completed\n"); /* XXX print drive? */ break; case MLX_BACKGROUND_REBUILD: device_printf(sc->mlx_dev, "drive rebuild completed\n"); /* XXX print channel/target? */ break; case MLX_BACKGROUND_SPONTANEOUS: default: /* if we have previously been non-idle, report the transition */ if (sc->mlx_rebuildstat.rs_code != MLX_REBUILDSTAT_IDLE) { device_printf(sc->mlx_dev, "background check/rebuild operation completed\n"); } } sc->mlx_background = 0; sc->mlx_rebuildstat.rs_code = MLX_REBUILDSTAT_IDLE; break; } kfree(mc->mc_data, M_DEVBUF); mlx_releasecmd(mc); } /******************************************************************************** ******************************************************************************** Channel Pause ******************************************************************************** ********************************************************************************/ /******************************************************************************** * It's time to perform a channel pause action for (sc), either start or stop * the pause. */ static void mlx_pause_action(struct mlx_softc *sc) { struct mlx_command *mc; int failsafe, i, command; /* What are we doing here? */ if (sc->mlx_pause.mp_when == 0) { command = MLX_CMD_STARTCHANNEL; failsafe = 0; } else { command = MLX_CMD_STOPCHANNEL; /* * Channels will always start again after the failsafe period, * which is specified in multiples of 30 seconds. * This constrains us to a maximum pause of 450 seconds. */ failsafe = ((sc->mlx_pause.mp_howlong - time_uptime) + 5) / 30; if (failsafe > 0xf) { failsafe = 0xf; sc->mlx_pause.mp_howlong = time_uptime + (0xf * 30) - 5; } } /* build commands for every channel requested */ for (i = 0; i < sc->mlx_enq2->me_actual_channels; i++) { if ((1 << i) & sc->mlx_pause.mp_which) { /* get ourselves a command buffer */ if ((mc = mlx_alloccmd(sc)) == NULL) goto fail; /* get a command slot */ mc->mc_flags |= MLX_CMD_PRIORITY; if (mlx_getslot(mc)) goto fail; /* build the command */ mlx_make_type2(mc, command, (failsafe << 4) | i, 0, 0, 0, 0, 0, 0, 0); mc->mc_complete = mlx_pause_done; mc->mc_private = sc; /* XXX not needed */ if (mlx_start(mc)) goto fail; /* command submitted OK */ return; fail: device_printf(sc->mlx_dev, "%s failed for channel %d\n", command == MLX_CMD_STOPCHANNEL ? "pause" : "resume", i); if (mc != NULL) mlx_releasecmd(mc); } } } static void mlx_pause_done(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; int command = mc->mc_mailbox[0]; int channel = mc->mc_mailbox[2] & 0xf; if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "%s command failed - %s\n", command == MLX_CMD_STOPCHANNEL ? "pause" : "resume", mlx_diagnose_command(mc)); } else if (command == MLX_CMD_STOPCHANNEL) { device_printf(sc->mlx_dev, "channel %d pausing for %ld seconds\n", channel, (long)(sc->mlx_pause.mp_howlong - time_uptime)); } else { device_printf(sc->mlx_dev, "channel %d resuming\n", channel); } mlx_releasecmd(mc); } /******************************************************************************** ******************************************************************************** Command Submission ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Perform an Enquiry command using a type-3 command buffer and a return a single * linear result buffer. If the completion function is specified, it will * be called with the completed command (and the result response will not be * valid until that point). Otherwise, the command will either be busy-waited * for (interrupts not enabled), or slept for. */ static void * mlx_enquire(struct mlx_softc *sc, int command, size_t bufsize, void (* complete)(struct mlx_command *mc)) { struct mlx_command *mc; void *result; int error; debug_called(1); /* get ourselves a command buffer */ error = 1; result = NULL; if ((mc = mlx_alloccmd(sc)) == NULL) goto out; /* allocate the response structure */ result = kmalloc(bufsize, M_DEVBUF, M_INTWAIT); /* get a command slot */ mc->mc_flags |= MLX_CMD_PRIORITY | MLX_CMD_DATAOUT; if (mlx_getslot(mc)) goto out; /* map the command so the controller can see it */ mc->mc_data = result; mc->mc_length = bufsize; mlx_mapcmd(mc); /* build an enquiry command */ mlx_make_type2(mc, command, 0, 0, 0, 0, 0, 0, mc->mc_dataphys, 0); /* do we want a completion callback? */ if (complete != NULL) { mc->mc_complete = complete; mc->mc_private = mc; if ((error = mlx_start(mc)) != 0) goto out; } else { /* run the command in either polled or wait mode */ if ((sc->mlx_state & MLX_STATE_INTEN) ? mlx_wait_command(mc) : mlx_poll_command(mc)) goto out; /* command completed OK? */ if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "ENQUIRY failed - %s\n", mlx_diagnose_command(mc)); goto out; } } error = 0; /* success */ out: /* we got a command, but nobody else will free it */ if ((complete == NULL) && (mc != NULL)) mlx_releasecmd(mc); /* we got an error, and we allocated a result */ if ((error != 0) && (result != NULL)) { kfree(result, M_DEVBUF); result = NULL; } return(result); } /******************************************************************************** * Perform a Flush command on the nominated controller. * * May be called with interrupts enabled or disabled; will not return until * the flush operation completes or fails. */ static int mlx_flush(struct mlx_softc *sc) { struct mlx_command *mc; int error; debug_called(1); /* get ourselves a command buffer */ error = 1; if ((mc = mlx_alloccmd(sc)) == NULL) goto out; /* get a command slot */ if (mlx_getslot(mc)) goto out; /* build a flush command */ mlx_make_type2(mc, MLX_CMD_FLUSH, 0, 0, 0, 0, 0, 0, 0, 0); /* can't assume that interrupts are going to work here, so play it safe */ if (mlx_poll_command(mc)) goto out; /* command completed OK? */ if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "FLUSH failed - %s\n", mlx_diagnose_command(mc)); goto out; } error = 0; /* success */ out: if (mc != NULL) mlx_releasecmd(mc); return(error); } /******************************************************************************** * Start a background consistency check on (drive). * * May be called with interrupts enabled or disabled; will return as soon as the * operation has started or been refused. */ static int mlx_check(struct mlx_softc *sc, int drive) { struct mlx_command *mc; int error; debug_called(1); /* get ourselves a command buffer */ error = 0x10000; if ((mc = mlx_alloccmd(sc)) == NULL) goto out; /* get a command slot */ if (mlx_getslot(mc)) goto out; /* build a checkasync command, set the "fix it" flag */ mlx_make_type2(mc, MLX_CMD_CHECKASYNC, 0, 0, 0, 0, 0, drive | 0x80, 0, 0); /* start the command and wait for it to be returned */ if (mlx_wait_command(mc)) goto out; /* command completed OK? */ if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "CHECK ASYNC failed - %s\n", mlx_diagnose_command(mc)); } else { device_printf(sc->mlx_sysdrive[drive].ms_disk, "consistency check started"); } error = mc->mc_status; out: if (mc != NULL) mlx_releasecmd(mc); return(error); } /******************************************************************************** * Start a background rebuild of the physical drive at (channel),(target). * * May be called with interrupts enabled or disabled; will return as soon as the * operation has started or been refused. */ static int mlx_rebuild(struct mlx_softc *sc, int channel, int target) { struct mlx_command *mc; int error; debug_called(1); /* get ourselves a command buffer */ error = 0x10000; if ((mc = mlx_alloccmd(sc)) == NULL) goto out; /* get a command slot */ if (mlx_getslot(mc)) goto out; /* build a checkasync command, set the "fix it" flag */ mlx_make_type2(mc, MLX_CMD_REBUILDASYNC, channel, target, 0, 0, 0, 0, 0, 0); /* start the command and wait for it to be returned */ if (mlx_wait_command(mc)) goto out; /* command completed OK? */ if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "REBUILD ASYNC failed - %s\n", mlx_diagnose_command(mc)); } else { device_printf(sc->mlx_dev, "drive rebuild started for %d:%d\n", channel, target); } error = mc->mc_status; out: if (mc != NULL) mlx_releasecmd(mc); return(error); } /******************************************************************************** * Run the command (mc) and return when it completes. * * Interrupts need to be enabled; returns nonzero on error. */ static int mlx_wait_command(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; int error, count; debug_called(1); mc->mc_complete = NULL; mc->mc_private = mc; /* wake us when you're done */ if ((error = mlx_start(mc)) != 0) return(error); count = 0; /* XXX better timeout? */ while ((mc->mc_status == MLX_STATUS_BUSY) && (count < 30)) { tsleep(mc->mc_private, PCATCH, "mlxwcmd", hz); } if (mc->mc_status != 0) { device_printf(sc->mlx_dev, "command failed - %s\n", mlx_diagnose_command(mc)); return(EIO); } return(0); } /******************************************************************************** * Start the command (mc) and busy-wait for it to complete. * * Should only be used when interrupts can't be relied upon. Returns 0 on * success, nonzero on error. * Successfully completed commands are dequeued. */ static int mlx_poll_command(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; int error, count; debug_called(1); mc->mc_complete = NULL; mc->mc_private = NULL; /* we will poll for it */ if ((error = mlx_start(mc)) != 0) return(error); count = 0; do { /* poll for completion */ mlx_done(mc->mc_sc); } while ((mc->mc_status == MLX_STATUS_BUSY) && (count++ < 15000000)); if (mc->mc_status != MLX_STATUS_BUSY) { crit_enter(); TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); crit_exit(); return(0); } device_printf(sc->mlx_dev, "command failed - %s\n", mlx_diagnose_command(mc)); return(EIO); } /******************************************************************************** * Pull as much work off the softc's work queue as possible and give it to the * controller. Leave a couple of slots free for emergencies. * * Must be called at splbio or in an equivalent fashion that prevents * reentry or activity on the bioq. */ static void mlx_startio(struct mlx_softc *sc) { struct mlx_command *mc; struct mlxd_softc *mlxd; struct bio *bio; struct buf *bp; int blkcount; int driveno; int cmd; u_daddr_t blkno; /* avoid reentrancy */ if (mlx_lock_tas(sc, MLX_LOCK_STARTING)) return; /* spin until something prevents us from doing any work */ crit_enter(); for (;;) { /* see if there's work to be done */ if ((bio = bioq_first(&sc->mlx_bioq)) == NULL) break; /* get a command */ if ((mc = mlx_alloccmd(sc)) == NULL) break; /* get a slot for the command */ if (mlx_getslot(mc) != 0) { mlx_releasecmd(mc); break; } /* get the buf containing our work */ bioq_remove(&sc->mlx_bioq, bio); bp = bio->bio_buf; sc->mlx_waitbufs--; crit_exit(); /* connect the buf to the command */ mc->mc_complete = mlx_completeio; mc->mc_private = bp; mc->mc_data = bp->b_data; mc->mc_length = bp->b_bcount; if (bp->b_cmd == BUF_CMD_READ) { mc->mc_flags |= MLX_CMD_DATAIN; cmd = MLX_CMD_READSG; } else { mc->mc_flags |= MLX_CMD_DATAOUT; cmd = MLX_CMD_WRITESG; } /* map the command so the controller can work with it */ mlx_mapcmd(mc); /* build a suitable I/O command (assumes 512-byte rounded transfers) */ mlxd = (struct mlxd_softc *)bio->bio_driver_info; driveno = mlxd->mlxd_drive - sc->mlx_sysdrive; blkcount = (bp->b_bcount + MLX_BLKSIZE - 1) / MLX_BLKSIZE; blkno = bio->bio_offset / MLX_BLKSIZE; if ((blkno + blkcount) > sc->mlx_sysdrive[driveno].ms_size) device_printf(sc->mlx_dev, "I/O beyond end of unit (%u,%d > %u)\n", blkno, blkcount, sc->mlx_sysdrive[driveno].ms_size); /* * Build the I/O command. Note that the SG list type bits are set to zero, * denoting the format of SG list that we are using. */ if (sc->mlx_iftype == MLX_IFTYPE_2) { mlx_make_type1(mc, (cmd == MLX_CMD_WRITESG) ? MLX_CMD_WRITESG_OLD : MLX_CMD_READSG_OLD, blkcount & 0xff, /* xfer length low byte */ blkno, /* physical block number */ driveno, /* target drive number */ mc->mc_sgphys, /* location of SG list */ mc->mc_nsgent & 0x3f); /* size of SG list (top 3 bits clear) */ } else { mlx_make_type5(mc, cmd, blkcount & 0xff, /* xfer length low byte */ (driveno << 3) | ((blkcount >> 8) & 0x07), /* target and length high 3 bits */ blkno, /* physical block number */ mc->mc_sgphys, /* location of SG list */ mc->mc_nsgent & 0x3f); /* size of SG list (top 3 bits clear) */ } /* try to give command to controller */ if (mlx_start(mc) != 0) { /* fail the command */ mc->mc_status = MLX_STATUS_WEDGED; mlx_completeio(mc); } crit_enter(); } crit_exit(); mlx_lock_clr(sc, MLX_LOCK_STARTING); } /******************************************************************************** * Handle completion of an I/O command. */ static void mlx_completeio(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; struct bio *bio = (mlx_bio *)mc->mc_private; struct mlxd_softc *mlxd = (struct mlxd_softc *)bio->bio_driver_info; struct buf *bp = bio->bio_buf; if (mc->mc_status != MLX_STATUS_OK) { /* could be more verbose here? */ bp->b_error = EIO; bp->b_flags |= B_ERROR; switch(mc->mc_status) { case MLX_STATUS_RDWROFFLINE: /* system drive has gone offline */ device_printf(mlxd->mlxd_dev, "drive offline\n"); /* should signal this with a return code */ mlxd->mlxd_drive->ms_state = MLX_SYSD_OFFLINE; break; default: /* other I/O error */ device_printf(sc->mlx_dev, "I/O error - %s\n", mlx_diagnose_command(mc)); #if 0 device_printf(sc->mlx_dev, " b_bcount %ld offset %lld\n", bp->b_bcount, bio->bio_offset); device_printf(sc->mlx_dev, " %13D\n", mc->mc_mailbox, " "); #endif break; } } mlx_releasecmd(mc); mlxd_intr(bio); } /******************************************************************************** * Take a command from user-space and try to run it. * * XXX Note that this can't perform very much in the way of error checking, and * as such, applications _must_ be considered trustworthy. * XXX Commands using S/G for data are not supported. */ static int mlx_user_command(struct mlx_softc *sc, struct mlx_usercommand *mu) { struct mlx_command *mc; struct mlx_dcdb *dcdb; void *kbuf; int error; debug_called(0); kbuf = NULL; mc = NULL; dcdb = NULL; error = ENOMEM; /* get ourselves a command and copy in from user space */ if ((mc = mlx_alloccmd(sc)) == NULL) goto out; bcopy(mu->mu_command, mc->mc_mailbox, sizeof(mc->mc_mailbox)); debug(0, "got command buffer"); /* if we need a buffer for data transfer, allocate one and copy in its initial contents */ if (mu->mu_datasize > 0) { if (mu->mu_datasize > MAXPHYS) return (EINVAL); if (((kbuf = kmalloc(mu->mu_datasize, M_DEVBUF, M_WAITOK)) == NULL) || (error = copyin(mu->mu_buf, kbuf, mu->mu_datasize))) goto out; debug(0, "got kernel buffer"); } /* get a command slot */ if (mlx_getslot(mc)) goto out; debug(0, "got a slot"); /* map the command so the controller can see it */ mc->mc_data = kbuf; mc->mc_length = mu->mu_datasize; mlx_mapcmd(mc); debug(0, "mapped"); /* * If this is a passthrough SCSI command, the DCDB is packed at the * beginning of the data area. Fix up the DCDB to point to the correct physical * address and override any bufptr supplied by the caller since we know * what it's meant to be. */ if (mc->mc_mailbox[0] == MLX_CMD_DIRECT_CDB) { dcdb = (struct mlx_dcdb *)kbuf; dcdb->dcdb_physaddr = mc->mc_dataphys + sizeof(*dcdb); mu->mu_bufptr = 8; } /* * If there's a data buffer, fix up the command's buffer pointer. */ if (mu->mu_datasize > 0) { /* range check the pointer to physical buffer address */ if ((mu->mu_bufptr < 0) || (mu->mu_bufptr > (sizeof(mu->mu_command) - sizeof(u_int32_t)))) { error = EINVAL; goto out; } mc->mc_mailbox[mu->mu_bufptr ] = mc->mc_dataphys & 0xff; mc->mc_mailbox[mu->mu_bufptr + 1] = (mc->mc_dataphys >> 8) & 0xff; mc->mc_mailbox[mu->mu_bufptr + 2] = (mc->mc_dataphys >> 16) & 0xff; mc->mc_mailbox[mu->mu_bufptr + 3] = (mc->mc_dataphys >> 24) & 0xff; } debug(0, "command fixup"); /* submit the command and wait */ if ((error = mlx_wait_command(mc)) != 0) goto out; /* copy out status and data */ mu->mu_status = mc->mc_status; if ((mu->mu_datasize > 0) && ((error = copyout(kbuf, mu->mu_buf, mu->mu_datasize)))) goto out; error = 0; out: mlx_releasecmd(mc); if (kbuf != NULL) kfree(kbuf, M_DEVBUF); return(error); } /******************************************************************************** ******************************************************************************** Command I/O to Controller ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Find a free command slot for (mc). * * Don't hand out a slot to a normal-priority command unless there are at least * 4 slots free for priority commands. */ static int mlx_getslot(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; int slot, limit; debug_called(1); /* * Enforce slot-usage limit, if we have the required information. */ if (sc->mlx_enq2 != NULL) { limit = sc->mlx_enq2->me_max_commands; } else { limit = 2; } if (sc->mlx_busycmds >= ((mc->mc_flags & MLX_CMD_PRIORITY) ? limit : limit - 4)) return(EBUSY); /* * Allocate an outstanding command slot * * XXX linear search is slow */ crit_enter(); for (slot = 0; slot < limit; slot++) { debug(2, "try slot %d", slot); if (sc->mlx_busycmd[slot] == NULL) break; } if (slot < limit) { sc->mlx_busycmd[slot] = mc; sc->mlx_busycmds++; } crit_exit(); /* out of slots? */ if (slot >= limit) return(EBUSY); debug(2, "got slot %d", slot); mc->mc_slot = slot; return(0); } /******************************************************************************** * Map/unmap (mc)'s data in the controller's addressable space. */ static void mlx_setup_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error) { struct mlx_command *mc = (struct mlx_command *)arg; struct mlx_softc *sc = mc->mc_sc; struct mlx_sgentry *sg; int i; debug_called(1); /* XXX should be unnecessary */ if (sc->mlx_enq2 && (nsegments > sc->mlx_enq2->me_max_sg)) panic("MLX: too many s/g segments (%d, max %d)", nsegments, sc->mlx_enq2->me_max_sg); /* get base address of s/g table */ sg = sc->mlx_sgtable + (mc->mc_slot * MLX_NSEG); /* save s/g table information in command */ mc->mc_nsgent = nsegments; mc->mc_sgphys = sc->mlx_sgbusaddr + (mc->mc_slot * MLX_NSEG * sizeof(struct mlx_sgentry)); mc->mc_dataphys = segs[0].ds_addr; /* populate s/g table */ for (i = 0; i < nsegments; i++, sg++) { sg->sg_addr = segs[i].ds_addr; sg->sg_count = segs[i].ds_len; } } static void mlx_mapcmd(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; debug_called(1); /* if the command involves data at all */ if (mc->mc_data != NULL) { /* map the data buffer into bus space and build the s/g list */ bus_dmamap_load(sc->mlx_buffer_dmat, mc->mc_dmamap, mc->mc_data, mc->mc_length, mlx_setup_dmamap, mc, 0); if (mc->mc_flags & MLX_CMD_DATAIN) bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_PREREAD); if (mc->mc_flags & MLX_CMD_DATAOUT) bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_PREWRITE); } } static void mlx_unmapcmd(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; debug_called(1); /* if the command involved data at all */ if (mc->mc_data != NULL) { if (mc->mc_flags & MLX_CMD_DATAIN) bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_POSTREAD); if (mc->mc_flags & MLX_CMD_DATAOUT) bus_dmamap_sync(sc->mlx_buffer_dmat, mc->mc_dmamap, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->mlx_buffer_dmat, mc->mc_dmamap); } } /******************************************************************************** * Try to deliver (mc) to the controller. * * Can be called at any interrupt level, with or without interrupts enabled. */ static int mlx_start(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; int i, done; debug_called(1); /* save the slot number as ident so we can handle this command when complete */ mc->mc_mailbox[0x1] = mc->mc_slot; /* mark the command as currently being processed */ mc->mc_status = MLX_STATUS_BUSY; /* set a default 60-second timeout XXX tunable? XXX not currently used */ mc->mc_timeout = time_uptime + 60; /* spin waiting for the mailbox */ for (i = 100000, done = 0; (i > 0) && !done; i--) { crit_enter(); if (sc->mlx_tryqueue(sc, mc)) { done = 1; /* move command to work queue */ TAILQ_INSERT_TAIL(&sc->mlx_work, mc, mc_link); } crit_exit(); /* drop spl to allow completion interrupts */ } /* command is enqueued */ if (done) return(0); /* * We couldn't get the controller to take the command. Revoke the slot * that the command was given and return it with a bad status. */ sc->mlx_busycmd[mc->mc_slot] = NULL; device_printf(sc->mlx_dev, "controller wedged (not taking commands)\n"); mc->mc_status = MLX_STATUS_WEDGED; mlx_complete(sc); return(EIO); } /******************************************************************************** * Poll the controller (sc) for completed commands. * Update command status and free slots for reuse. If any slots were freed, * new commands may be posted. * * Returns nonzero if one or more commands were completed. */ static int mlx_done(struct mlx_softc *sc) { struct mlx_command *mc; int result; u_int8_t slot; u_int16_t status; debug_called(2); result = 0; /* loop collecting completed commands */ crit_enter(); for (;;) { /* poll for a completed command's identifier and status */ if (sc->mlx_findcomplete(sc, &slot, &status)) { result = 1; mc = sc->mlx_busycmd[slot]; /* find command */ if (mc != NULL) { /* paranoia */ if (mc->mc_status == MLX_STATUS_BUSY) { mc->mc_status = status; /* save status */ /* free slot for reuse */ sc->mlx_busycmd[slot] = NULL; sc->mlx_busycmds--; } else { device_printf(sc->mlx_dev, "duplicate done event for slot %d\n", slot); } } else { device_printf(sc->mlx_dev, "done event for nonbusy slot %d\n", slot); } } else { break; } } crit_exit(); /* if we've completed any commands, try posting some more */ if (result) mlx_startio(sc); /* handle completion and timeouts */ mlx_complete(sc); return(result); } /******************************************************************************** * Perform post-completion processing for commands on (sc). */ static void mlx_complete(struct mlx_softc *sc) { struct mlx_command *mc, *nc; debug_called(2); /* avoid reentrancy XXX might want to signal and request a restart */ if (mlx_lock_tas(sc, MLX_LOCK_COMPLETING)) return; crit_enter(); /* scan the list of busy/done commands */ mc = TAILQ_FIRST(&sc->mlx_work); while (mc != NULL) { nc = TAILQ_NEXT(mc, mc_link); /* Command has been completed in some fashion */ if (mc->mc_status != MLX_STATUS_BUSY) { /* unmap the command's data buffer */ mlx_unmapcmd(mc); /* * Does the command have a completion handler? */ if (mc->mc_complete != NULL) { /* remove from list and give to handler */ TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); mc->mc_complete(mc); /* * Is there a sleeper waiting on this command? */ } else if (mc->mc_private != NULL) { /* sleeping caller wants to know about it */ /* remove from list and wake up sleeper */ TAILQ_REMOVE(&sc->mlx_work, mc, mc_link); wakeup_one(mc->mc_private); /* * Leave the command for a caller that's polling for it. */ } else { } } mc = nc; } crit_exit(); mlx_lock_clr(sc, MLX_LOCK_COMPLETING); } /******************************************************************************** ******************************************************************************** Command Buffer Management ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Get a new command buffer. * * This may return NULL in low-memory cases. * * Note that using malloc() is expensive (the command buffer is << 1 page) but * necessary if we are to be a loadable module before the zone allocator is fixed. * * If possible, we recycle a command buffer that's been used before. * * XXX Note that command buffers are not cleaned out - it is the caller's * responsibility to ensure that all required fields are filled in before * using a buffer. */ static struct mlx_command * mlx_alloccmd(struct mlx_softc *sc) { struct mlx_command *mc; int error; debug_called(1); crit_enter(); if ((mc = TAILQ_FIRST(&sc->mlx_freecmds)) != NULL) TAILQ_REMOVE(&sc->mlx_freecmds, mc, mc_link); crit_exit(); /* allocate a new command buffer? */ if (mc == NULL) { mc = kmalloc(sizeof(*mc), M_DEVBUF, M_INTWAIT | M_ZERO); mc->mc_sc = sc; error = bus_dmamap_create(sc->mlx_buffer_dmat, 0, &mc->mc_dmamap); if (error) { kfree(mc, M_DEVBUF); return(NULL); } } return(mc); } /******************************************************************************** * Release a command buffer for recycling. * * XXX It might be a good idea to limit the number of commands we save for reuse * if it's shown that this list bloats out massively. */ static void mlx_releasecmd(struct mlx_command *mc) { debug_called(1); crit_enter(); TAILQ_INSERT_HEAD(&mc->mc_sc->mlx_freecmds, mc, mc_link); crit_exit(); } /******************************************************************************** * Permanently discard a command buffer. */ static void mlx_freecmd(struct mlx_command *mc) { struct mlx_softc *sc = mc->mc_sc; debug_called(1); bus_dmamap_destroy(sc->mlx_buffer_dmat, mc->mc_dmamap); kfree(mc, M_DEVBUF); } /******************************************************************************** ******************************************************************************** Type 3 interface accessor methods ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure * (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v3_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) { int i; debug_called(2); /* ready for our command? */ if (!(MLX_V3_GET_IDBR(sc) & MLX_V3_IDB_FULL)) { /* copy mailbox data to window */ for (i = 0; i < 13; i++) MLX_V3_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); /* post command */ MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_FULL); return(1); } return(0); } /******************************************************************************** * See if a command has been completed, if so acknowledge its completion * and recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v3_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) { debug_called(2); /* status available? */ if (MLX_V3_GET_ODBR(sc) & MLX_V3_ODB_SAVAIL) { *slot = MLX_V3_GET_STATUS_IDENT(sc); /* get command identifier */ *status = MLX_V3_GET_STATUS(sc); /* get status */ /* acknowledge completion */ MLX_V3_PUT_ODBR(sc, MLX_V3_ODB_SAVAIL); MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_SACK); return(1); } return(0); } /******************************************************************************** * Enable/disable interrupts as requested. (No acknowledge required) * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v3_intaction(struct mlx_softc *sc, int action) { debug_called(1); switch(action) { case MLX_INTACTION_DISABLE: MLX_V3_PUT_IER(sc, 0); sc->mlx_state &= ~MLX_STATE_INTEN; break; case MLX_INTACTION_ENABLE: MLX_V3_PUT_IER(sc, 1); sc->mlx_state |= MLX_STATE_INTEN; break; } } /******************************************************************************** * Poll for firmware error codes during controller initialisation. * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v3_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) { u_int8_t fwerror; static int initted = 0; debug_called(2); /* first time around, clear any hardware completion status */ if (!initted) { MLX_V3_PUT_IDBR(sc, MLX_V3_IDB_SACK); DELAY(1000); initted = 1; } /* init in progress? */ if (!(MLX_V3_GET_IDBR(sc) & MLX_V3_IDB_INIT_BUSY)) return(0); /* test error value */ fwerror = MLX_V3_GET_FWERROR(sc); if (!(fwerror & MLX_V3_FWERROR_PEND)) return(1); /* mask status pending bit, fetch status */ *error = fwerror & ~MLX_V3_FWERROR_PEND; *param1 = MLX_V3_GET_FWERROR_PARAM1(sc); *param2 = MLX_V3_GET_FWERROR_PARAM2(sc); /* acknowledge */ MLX_V3_PUT_FWERROR(sc, 0); return(2); } /******************************************************************************** ******************************************************************************** Type 4 interface accessor methods ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure * (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v4_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) { int i; debug_called(2); /* ready for our command? */ if (!(MLX_V4_GET_IDBR(sc) & MLX_V4_IDB_FULL)) { /* copy mailbox data to window */ for (i = 0; i < 13; i++) MLX_V4_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); /* memory-mapped controller, so issue a write barrier to ensure the mailbox is filled */ bus_space_barrier(sc->mlx_btag, sc->mlx_bhandle, MLX_V4_MAILBOX, MLX_V4_MAILBOX_LENGTH, BUS_SPACE_BARRIER_WRITE); /* post command */ MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_HWMBOX_CMD); return(1); } return(0); } /******************************************************************************** * See if a command has been completed, if so acknowledge its completion * and recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v4_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) { debug_called(2); /* status available? */ if (MLX_V4_GET_ODBR(sc) & MLX_V4_ODB_HWSAVAIL) { *slot = MLX_V4_GET_STATUS_IDENT(sc); /* get command identifier */ *status = MLX_V4_GET_STATUS(sc); /* get status */ /* acknowledge completion */ MLX_V4_PUT_ODBR(sc, MLX_V4_ODB_HWMBOX_ACK); MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_SACK); return(1); } return(0); } /******************************************************************************** * Enable/disable interrupts as requested. * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v4_intaction(struct mlx_softc *sc, int action) { debug_called(1); switch(action) { case MLX_INTACTION_DISABLE: MLX_V4_PUT_IER(sc, MLX_V4_IER_MASK | MLX_V4_IER_DISINT); sc->mlx_state &= ~MLX_STATE_INTEN; break; case MLX_INTACTION_ENABLE: MLX_V4_PUT_IER(sc, MLX_V4_IER_MASK & ~MLX_V4_IER_DISINT); sc->mlx_state |= MLX_STATE_INTEN; break; } } /******************************************************************************** * Poll for firmware error codes during controller initialisation. * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v4_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) { u_int8_t fwerror; static int initted = 0; debug_called(2); /* first time around, clear any hardware completion status */ if (!initted) { MLX_V4_PUT_IDBR(sc, MLX_V4_IDB_SACK); DELAY(1000); initted = 1; } /* init in progress? */ if (!(MLX_V4_GET_IDBR(sc) & MLX_V4_IDB_INIT_BUSY)) return(0); /* test error value */ fwerror = MLX_V4_GET_FWERROR(sc); if (!(fwerror & MLX_V4_FWERROR_PEND)) return(1); /* mask status pending bit, fetch status */ *error = fwerror & ~MLX_V4_FWERROR_PEND; *param1 = MLX_V4_GET_FWERROR_PARAM1(sc); *param2 = MLX_V4_GET_FWERROR_PARAM2(sc); /* acknowledge */ MLX_V4_PUT_FWERROR(sc, 0); return(2); } /******************************************************************************** ******************************************************************************** Type 5 interface accessor methods ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Try to give (mc) to the controller. Returns 1 if successful, 0 on failure * (the controller is not ready to take a command). * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v5_tryqueue(struct mlx_softc *sc, struct mlx_command *mc) { int i; debug_called(2); /* ready for our command? */ if (MLX_V5_GET_IDBR(sc) & MLX_V5_IDB_EMPTY) { /* copy mailbox data to window */ for (i = 0; i < 13; i++) MLX_V5_PUT_MAILBOX(sc, i, mc->mc_mailbox[i]); /* post command */ MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_HWMBOX_CMD); return(1); } return(0); } /******************************************************************************** * See if a command has been completed, if so acknowledge its completion * and recover the slot number and status code. * * Must be called at splbio or in a fashion that prevents reentry. */ static int mlx_v5_findcomplete(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status) { debug_called(2); /* status available? */ if (MLX_V5_GET_ODBR(sc) & MLX_V5_ODB_HWSAVAIL) { *slot = MLX_V5_GET_STATUS_IDENT(sc); /* get command identifier */ *status = MLX_V5_GET_STATUS(sc); /* get status */ /* acknowledge completion */ MLX_V5_PUT_ODBR(sc, MLX_V5_ODB_HWMBOX_ACK); MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_SACK); return(1); } return(0); } /******************************************************************************** * Enable/disable interrupts as requested. * * Must be called at splbio or in a fashion that prevents reentry. */ static void mlx_v5_intaction(struct mlx_softc *sc, int action) { debug_called(1); switch(action) { case MLX_INTACTION_DISABLE: MLX_V5_PUT_IER(sc, 0xff & MLX_V5_IER_DISINT); sc->mlx_state &= ~MLX_STATE_INTEN; break; case MLX_INTACTION_ENABLE: MLX_V5_PUT_IER(sc, 0xff & ~MLX_V5_IER_DISINT); sc->mlx_state |= MLX_STATE_INTEN; break; } } /******************************************************************************** * Poll for firmware error codes during controller initialisation. * Returns 0 if initialisation is complete, 1 if still in progress but no * error has been fetched, 2 if an error has been retrieved. */ static int mlx_v5_fw_handshake(struct mlx_softc *sc, int *error, int *param1, int *param2) { u_int8_t fwerror; static int initted = 0; debug_called(2); /* first time around, clear any hardware completion status */ if (!initted) { MLX_V5_PUT_IDBR(sc, MLX_V5_IDB_SACK); DELAY(1000); initted = 1; } /* init in progress? */ if (MLX_V5_GET_IDBR(sc) & MLX_V5_IDB_INIT_DONE) return(0); /* test for error value */ fwerror = MLX_V5_GET_FWERROR(sc); if (!(fwerror & MLX_V5_FWERROR_PEND)) return(1); /* mask status pending bit, fetch status */ *error = fwerror & ~MLX_V5_FWERROR_PEND; *param1 = MLX_V5_GET_FWERROR_PARAM1(sc); *param2 = MLX_V5_GET_FWERROR_PARAM2(sc); /* acknowledge */ MLX_V5_PUT_FWERROR(sc, 0xff); return(2); } /******************************************************************************** ******************************************************************************** Debugging ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Return a status message describing (mc) */ static char *mlx_status_messages[] = { "normal completion", /* 00 */ "irrecoverable data error", /* 01 */ "drive does not exist, or is offline", /* 02 */ "attempt to write beyond end of drive", /* 03 */ "bad data encountered", /* 04 */ "invalid log entry request", /* 05 */ "attempt to rebuild online drive", /* 06 */ "new disk failed during rebuild", /* 07 */ "invalid channel/target", /* 08 */ "rebuild/check already in progress", /* 09 */ "one or more disks are dead", /* 10 */ "invalid or non-redundant drive", /* 11 */ "channel is busy", /* 12 */ "channel is not stopped", /* 13 */ "rebuild successfully terminated", /* 14 */ "unsupported command", /* 15 */ "check condition received", /* 16 */ "device is busy", /* 17 */ "selection or command timeout", /* 18 */ "command terminated abnormally", /* 19 */ "" }; static struct { int command; u_int16_t status; int msg; } mlx_messages[] = { {MLX_CMD_READSG, 0x0001, 1}, {MLX_CMD_READSG, 0x0002, 1}, {MLX_CMD_READSG, 0x0105, 3}, {MLX_CMD_READSG, 0x010c, 4}, {MLX_CMD_WRITESG, 0x0001, 1}, {MLX_CMD_WRITESG, 0x0002, 1}, {MLX_CMD_WRITESG, 0x0105, 3}, {MLX_CMD_READSG_OLD, 0x0001, 1}, {MLX_CMD_READSG_OLD, 0x0002, 1}, {MLX_CMD_READSG_OLD, 0x0105, 3}, {MLX_CMD_WRITESG_OLD, 0x0001, 1}, {MLX_CMD_WRITESG_OLD, 0x0002, 1}, {MLX_CMD_WRITESG_OLD, 0x0105, 3}, {MLX_CMD_LOGOP, 0x0105, 5}, {MLX_CMD_REBUILDASYNC, 0x0002, 6}, {MLX_CMD_REBUILDASYNC, 0x0004, 7}, {MLX_CMD_REBUILDASYNC, 0x0105, 8}, {MLX_CMD_REBUILDASYNC, 0x0106, 9}, {MLX_CMD_REBUILDASYNC, 0x0107, 14}, {MLX_CMD_CHECKASYNC, 0x0002, 10}, {MLX_CMD_CHECKASYNC, 0x0105, 11}, {MLX_CMD_CHECKASYNC, 0x0106, 9}, {MLX_CMD_STOPCHANNEL, 0x0106, 12}, {MLX_CMD_STOPCHANNEL, 0x0105, 8}, {MLX_CMD_STARTCHANNEL, 0x0005, 13}, {MLX_CMD_STARTCHANNEL, 0x0105, 8}, {MLX_CMD_DIRECT_CDB, 0x0002, 16}, {MLX_CMD_DIRECT_CDB, 0x0008, 17}, {MLX_CMD_DIRECT_CDB, 0x000e, 18}, {MLX_CMD_DIRECT_CDB, 0x000f, 19}, {MLX_CMD_DIRECT_CDB, 0x0105, 8}, {0, 0x0104, 14}, {-1, 0, 0} }; static char * mlx_diagnose_command(struct mlx_command *mc) { static char unkmsg[80]; int i; /* look up message in table */ for (i = 0; mlx_messages[i].command != -1; i++) if (((mc->mc_mailbox[0] == mlx_messages[i].command) || (mlx_messages[i].command == 0)) && (mc->mc_status == mlx_messages[i].status)) return(mlx_status_messages[mlx_messages[i].msg]); ksprintf(unkmsg, "unknown response 0x%x for command 0x%x", (int)mc->mc_status, (int)mc->mc_mailbox[0]); return(unkmsg); } /******************************************************************************* * Print a string describing the controller (sc) */ static struct { int hwid; char *name; } mlx_controller_names[] = { {0x01, "960P/PD"}, {0x02, "960PL"}, {0x10, "960PG"}, {0x11, "960PJ"}, {0x12, "960PR"}, {0x13, "960PT"}, {0x14, "960PTL0"}, {0x15, "960PRL"}, {0x16, "960PTL1"}, {0x20, "1164PVX"}, {-1, NULL} }; static void mlx_describe_controller(struct mlx_softc *sc) { static char buf[80]; char *model; int i; for (i = 0, model = NULL; mlx_controller_names[i].name != NULL; i++) { if ((sc->mlx_enq2->me_hardware_id & 0xff) == mlx_controller_names[i].hwid) { model = mlx_controller_names[i].name; break; } } if (model == NULL) { ksprintf(buf, " model 0x%x", sc->mlx_enq2->me_hardware_id & 0xff); model = buf; } device_printf(sc->mlx_dev, "DAC%s, %d channel%s, firmware %d.%02d-%c-%02d, %dMB RAM\n", model, sc->mlx_enq2->me_actual_channels, sc->mlx_enq2->me_actual_channels > 1 ? "s" : "", sc->mlx_enq2->me_firmware_id & 0xff, (sc->mlx_enq2->me_firmware_id >> 8) & 0xff, (sc->mlx_enq2->me_firmware_id >> 24) & 0xff, (sc->mlx_enq2->me_firmware_id >> 16) & 0xff, sc->mlx_enq2->me_mem_size / (1024 * 1024)); if (bootverbose) { device_printf(sc->mlx_dev, " Hardware ID 0x%08x\n", sc->mlx_enq2->me_hardware_id); device_printf(sc->mlx_dev, " Firmware ID 0x%08x\n", sc->mlx_enq2->me_firmware_id); device_printf(sc->mlx_dev, " Configured/Actual channels %d/%d\n", sc->mlx_enq2->me_configured_channels, sc->mlx_enq2->me_actual_channels); device_printf(sc->mlx_dev, " Max Targets %d\n", sc->mlx_enq2->me_max_targets); device_printf(sc->mlx_dev, " Max Tags %d\n", sc->mlx_enq2->me_max_tags); device_printf(sc->mlx_dev, " Max System Drives %d\n", sc->mlx_enq2->me_max_sys_drives); device_printf(sc->mlx_dev, " Max Arms %d\n", sc->mlx_enq2->me_max_arms); device_printf(sc->mlx_dev, " Max Spans %d\n", sc->mlx_enq2->me_max_spans); device_printf(sc->mlx_dev, " DRAM/cache/flash/NVRAM size %d/%d/%d/%d\n", sc->mlx_enq2->me_mem_size, sc->mlx_enq2->me_cache_size, sc->mlx_enq2->me_flash_size, sc->mlx_enq2->me_nvram_size); device_printf(sc->mlx_dev, " DRAM type %d\n", sc->mlx_enq2->me_mem_type); device_printf(sc->mlx_dev, " Clock Speed %dns\n", sc->mlx_enq2->me_clock_speed); device_printf(sc->mlx_dev, " Hardware Speed %dns\n", sc->mlx_enq2->me_hardware_speed); device_printf(sc->mlx_dev, " Max Commands %d\n", sc->mlx_enq2->me_max_commands); device_printf(sc->mlx_dev, " Max SG Entries %d\n", sc->mlx_enq2->me_max_sg); device_printf(sc->mlx_dev, " Max DP %d\n", sc->mlx_enq2->me_max_dp); device_printf(sc->mlx_dev, " Max IOD %d\n", sc->mlx_enq2->me_max_iod); device_printf(sc->mlx_dev, " Max Comb %d\n", sc->mlx_enq2->me_max_comb); device_printf(sc->mlx_dev, " Latency %ds\n", sc->mlx_enq2->me_latency); device_printf(sc->mlx_dev, " SCSI Timeout %ds\n", sc->mlx_enq2->me_scsi_timeout); device_printf(sc->mlx_dev, " Min Free Lines %d\n", sc->mlx_enq2->me_min_freelines); device_printf(sc->mlx_dev, " Rate Constant %d\n", sc->mlx_enq2->me_rate_const); device_printf(sc->mlx_dev, " MAXBLK %d\n", sc->mlx_enq2->me_maxblk); device_printf(sc->mlx_dev, " Blocking Factor %d sectors\n", sc->mlx_enq2->me_blocking_factor); device_printf(sc->mlx_dev, " Cache Line Size %d blocks\n", sc->mlx_enq2->me_cacheline); device_printf(sc->mlx_dev, " SCSI Capability %s%dMHz, %d bit\n", sc->mlx_enq2->me_scsi_cap & (1<<4) ? "differential " : "", (1 << ((sc->mlx_enq2->me_scsi_cap >> 2) & 3)) * 10, 8 << (sc->mlx_enq2->me_scsi_cap & 0x3)); device_printf(sc->mlx_dev, " Firmware Build Number %d\n", sc->mlx_enq2->me_firmware_build); device_printf(sc->mlx_dev, " Fault Management Type %d\n", sc->mlx_enq2->me_fault_mgmt_type); device_printf(sc->mlx_dev, " Features %pb%i\n", "\20\4Background Init\3Read Ahead\2MORE\1Cluster\n", sc->mlx_enq2->me_firmware_features); } } /******************************************************************************* * Emit a string describing the firmware handshake status code, and return a flag * indicating whether the code represents a fatal error. * * Error code interpretations are from the Linux driver, and don't directly match * the messages printed by Mylex's BIOS. This may change if documentation on the * codes is forthcoming. */ static int mlx_fw_message(struct mlx_softc *sc, int error, int param1, int param2) { switch(error) { case 0x00: device_printf(sc->mlx_dev, "physical drive %d:%d not responding\n", param2, param1); break; case 0x08: /* we could be neater about this and give some indication when we receive more of them */ if (!(sc->mlx_flags & MLX_SPINUP_REPORTED)) { device_printf(sc->mlx_dev, "spinning up drives...\n"); sc->mlx_flags |= MLX_SPINUP_REPORTED; } break; case 0x30: device_printf(sc->mlx_dev, "configuration checksum error\n"); break; case 0x60: device_printf(sc->mlx_dev, "mirror race recovery failed\n"); break; case 0x70: device_printf(sc->mlx_dev, "mirror race recovery in progress\n"); break; case 0x90: device_printf(sc->mlx_dev, "physical drive %d:%d COD mismatch\n", param2, param1); break; case 0xa0: device_printf(sc->mlx_dev, "logical drive installation aborted\n"); break; case 0xb0: device_printf(sc->mlx_dev, "mirror race on a critical system drive\n"); break; case 0xd0: device_printf(sc->mlx_dev, "new controller configuration found\n"); break; case 0xf0: device_printf(sc->mlx_dev, "FATAL MEMORY PARITY ERROR\n"); return(1); default: device_printf(sc->mlx_dev, "unknown firmware initialisation error %02x:%02x:%02x\n", error, param1, param2); break; } return(0); } /******************************************************************************** ******************************************************************************** Utility Functions ******************************************************************************** ********************************************************************************/ /******************************************************************************** * Find the disk whose unit number is (unit) on this controller */ static struct mlx_sysdrive * mlx_findunit(struct mlx_softc *sc, int unit) { int i; /* search system drives */ for (i = 0; i < MLX_MAXDRIVES; i++) { /* is this one attached? */ if (sc->mlx_sysdrive[i].ms_disk != NULL) { /* is this the one? */ if (unit == device_get_unit(sc->mlx_sysdrive[i].ms_disk)) return(&sc->mlx_sysdrive[i]); } } return(NULL); } |