⬢ DragonFlyBSD Kernel Audit
DF-5583 / run.control_boot.log
← back to finding ↓ download raw
XMMNNOO-\|/-\|/-\|/-\|/                                                                               
 1. Boot DragonFly [kernel]                  ,--,                       ,--,   
 2. Boot DragonFly in Safe Mode              |   `-,       _:_       ,-'   |   
 3. Boot DragonFly without AHCI driver        `,    `-,   (/ \)   ,-'    ,'    
 4. Boot DragonFly without ACPI driver          `-,    `-,/   \,-'    ,-'      
 9. Escape to loader prompt (also ESC)             `------{   }------'         
 r. Boot DragonFly to a rescue ramdisk         ,----------{   }----------,     
 s. Boot DragonFly in single user mode        |        _,-{   }-,_        |    
 v. Boot DragonFly with verbose logging        `-,__,-'   \   /   `-,__,-'     
 R. Reboot                                                 | |                 
                                                           | |                 
                                                           | |                 
                                                           | |                 
                                                           | |                 
                                                           | |                 
                                                           `,'                 
                                                                               

Booting in 10 seconds... 
Booting in 9 seconds... 
Booting in 8 seconds... 
Booting in 7 seconds... 
Booting in 6 seconds... 
Booting in 5 seconds... 
Booting in 4 seconds... 
Booting in 3 seconds... 
Booting in 2 seconds... 
Booting in 1 second... 
Booting in 0 seconds... 
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-kernel (from /boot/kernel/kernel) text=0xbca620 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/data=0x177ad7+0x9dfd49 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-syms=[0x8+0xffdc8\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+0x8+0xbe7ec|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-]
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|ehci.ko /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|size 0x7c288 at 0x1ce1000
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-xhci.ko \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-size 0x8c778 at 0x1d5e000
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=0000000003e00000
SMAP type=01 base=0000000004000000 len=00000000bbfdd000
SMAP type=02 base=00000000bffdd000 len=0000000000023000
SMAP type=02 base=00000000feffc000 len=0000000000004000
SMAP type=02 base=00000000fffc0000 len=0000000000040000
SMAP type=01 base=0000000100000000 len=0000000040000000
Copyright (c) 2003-2026 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
Slab ZoneSize set to 128KB
Leaving critical section, allowing interrupts
ACPI SDT: RSDP in kenv hint
ACPI FADT: SCI irq 9, conform/conform
DragonFly v6.5.0.1712.g89e6a-DEVELOPMENT #1: Mon Jun 29 14:18:01 UTC 2026
    root@ephemeral-5c2002c44b6c:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: can't locate HPET
Using cputimer i8254_timer2 for TSC calibration
Calibrating clock(s) ...
TSC clock: 3600005870 Hz (Method A)
i8254 clock: 1193180 Hz
hw.calibrate_timers_with_rtc not set - using default i8254 frequency
hw.calibrate_timers_with_rtc not set - using old calibration method
Timer latency (in TSC ticks): 17505 min=15960 max=19762
TSC clock: 3600011587 Hz, NOT invariant
CPU: QEMU Virtual CPU version 2.5+ (3600.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x60fb1  Family=0xf  Model=0x6b  Stepping=1
  Features=0x1783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x80202001<SSE3,CX16,x2APIC,VMM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  MONITOR/MWAIT Features=0x2<INTBRK>
3rd-level cache: 16MByte, 16-way set associative, 64 byte line size
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 512 kbytes, 16-way associative, 64 bytes/line
VMM/Hypervisor: Origin="KVMKVMKVM"
real memory  = 4293381120 (4094 MB)
Physical memory chunk(s):
0x00020000 - 0x0007ffff, 393216 bytes (96 pages)
0x00100000 - 0x001fffff, 1048576 bytes (256 pages)
0x02380000 - 0x03efffff, 28835840 bytes (7040 pages)
0x04000000 - 0xbffbffff, 3153854464 bytes (769984 pages)
0x100000000 - 0x13fefffff, 1072693248 bytes (261888 pages)
avail memory = 4088926208 (3899 MB)
LAPIC: enter X2APIC mode
madt_lapic_probe: lapic_count=1 x2apic_count=0
ACPI MADT: BSP apic id 0
ACPI MADT: cpu id 0, acpi id 0, apic id 0
ACPI CPUS = 1
lapic: divisor index 0, frequency 500001326 Hz
SMP: CPU0 apic_initialize():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
Bits within APICID: logical_CPU_bits: 0; core_bits: 3
CPU Topology: cores_per_chip: 1; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
SMI Frequency (worst case): 40000 Hz (25 us)
SMP: Waiting APs LAPIC initialization
ACPI MADT: warning invalid intsrc irq 5 trig, level
ACPI MADT: warning invalid intsrc irq 9 trig, level
ACPI MADT: warning invalid intsrc irq 10 trig, level
ACPI MADT: warning invalid intsrc irq 11 trig, level
ACPI MADT: IOAPIC addr 0xfec00000, apic id 0, gsi base 0
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
ACPI MADT: SCI irq 9, first test level/high
IOAPIC: idx 0, apic id 1, gsi base 0, npin 24
IOAPIC: irq 1, gsi 1 -> cpu0 (auto)
IOAPIC: irq 1 -> gsi 1 edge/high
IOAPIC: irq 0, gsi 2 -> cpu0 (0)
IOAPIC: irq 0 -> gsi 2 edge/high
IOAPIC: irq 3, gsi 3 -> cpu0 (auto)
IOAPIC: irq 3 -> gsi 3 edge/high
IOAPIC: irq 4, gsi 4 -> cpu0 (auto)
IOAPIC: irq 4 -> gsi 4 edge/high
IOAPIC: irq 5, gsi 5 -> cpu0 (auto)
IOAPIC: irq 5 -> gsi 5 edge/high
IOAPIC: irq 6, gsi 6 -> cpu0 (auto)
IOAPIC: irq 6 -> gsi 6 edge/high
IOAPIC: irq 7, gsi 7 -> cpu0 (auto)
IOAPIC: irq 7 -> gsi 7 edge/high
IOAPIC: irq 8, gsi 8 -> cpu0 (auto)
IOAPIC: irq 8 -> gsi 8 edge/high
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
IOAPIC: irq 9 -> gsi 9 edge/high
IOAPIC: irq 10, gsi 10 -> cpu0 (auto)
IOAPIC: irq 10 -> gsi 10 edge/high
IOAPIC: irq 11, gsi 11 -> cpu0 (auto)
IOAPIC: irq 11 -> gsi 11 edge/high
IOAPIC: irq 12, gsi 12 -> cpu0 (auto)
IOAPIC: irq 12 -> gsi 12 edge/high
IOAPIC: irq 13, gsi 13 -> cpu0 (auto)
IOAPIC: irq 13 -> gsi 13 edge/high
IOAPIC: irq 14, gsi 14 -> cpu0 (auto)
IOAPIC: irq 14 -> gsi 14 edge/high
IOAPIC: irq 15, gsi 15 -> cpu0 (auto)
IOAPIC: irq 15 -> gsi 15 edge/high
IOAPIC: irq 16, gsi 16 -> cpu0 (auto)
IOAPIC: irq 16 -> gsi 16 level/low
IOAPIC: irq 17, gsi 17 -> cpu0 (auto)
IOAPIC: irq 17 -> gsi 17 level/low
IOAPIC: irq 18, gsi 18 -> cpu0 (auto)
IOAPIC: irq 18 -> gsi 18 level/low
IOAPIC: irq 19, gsi 19 -> cpu0 (auto)
IOAPIC: irq 19 -> gsi 19 level/low
IOAPIC: irq 20, gsi 20 -> cpu0 (auto)
IOAPIC: irq 20 -> gsi 20 level/low
IOAPIC: irq 21, gsi 21 -> cpu0 (auto)
IOAPIC: irq 21 -> gsi 21 level/low
IOAPIC: irq 22, gsi 22 -> cpu0 (auto)
IOAPIC: irq 22 -> gsi 22 level/low
IOAPIC: irq 23, gsi 23 -> cpu0 (auto)
IOAPIC: irq 23 -> gsi 23 level/low
IOAPIC: cpu0 irq 2 reserved
IOAPIC: legacy irq max 24
ELCR Found.  ISA IRQs programmed as:
  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
  E  E  E  E  E  E  E  E  E  E  L  L  E  E  E  E
MPTABLE: 0:1 INTA -> IOAPIC 0.9
MPTABLE: 0:3 INTA -> IOAPIC 0.11
MPTABLE: 0:4 INTA -> IOAPIC 0.11
Initialize MI interrupts for 1 cpus
IOAPIC: testing 8254 interrupt delivery... success
objcache: magazine cap [6, 4102]
Finish MP startup
Active CPU Mask: 0000000000000001
TSC is not invariant, no further tests will be performed
Spectre: support=( none ) req=ffff operating=( none )
MDS: support=( none ) req=ffff operating=( none )
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81dec000.
Preloaded elf obj module "/boot/kernel/ehci.ko" at 0xffffffff81dec290.
Preloaded elf obj module "/boot/kernel/xhci.ko" at 0xffffffff81decb38.
Start usched_dfly helpers on cpus:
    cpu0 - Unknown cpunode->type=1. siblings:  no siblings
start dummy scheduler helpers on cpus: 0
Start usched_bsd4 helpers on cpus:
    cpu0 - Unknown cpunode->type=1. Siblings:  no siblings
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
Initialize isolation pmap
isolate ffffffff818c4f00-ffffffff818c4f90 (144)
isolate ffffffff818c5000-ffffffff818c6f70 (8048)
isolate ffffffff818c7000-ffffffff818c8f70 (8048)
isolate ffffffff818c4f98-ffffffff818c5000 (104)
isolate ffffffff817aafa0-ffffffff817abfa0 (4096)
isolate ffffffff818aafa0-ffffffff818bafa0 (65536)
isolate ffffffff802aa4a0-ffffffff80c369d1 (10011953)
interrupt uses mplock: swi_taskq
sensors: tasks default to cpu0
wdog: In-kernel automatic watchdog reset enabled
wlan: <802.11 Link Layer>
ath_rate: <SampleRate bit-rate selection algorithm>
ath_dfs: WTF module
crypto: dummy module loaded
md0: Malloc disk
evdev device loaded.
md0: MBR magic not found; assume a COMPATIBILITY_SLICE (s0)
kbd1 at kbdmux0
hpt27xx: RocketRAID 27xx controller driver v1.0
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
low dma reserve placed @ 0xfffff8008d140000
IOAPIC: rman cpu0 0 - 1
IOAPIC: rman cpu0 3 - 95
IOAPIC: rman cpu0 97 - 191
ACPI: RSDP 0x0000000040000000 000014 (v00 DFBSD )
ACPI: RSDT 0x0000000040000100 00002C (v01 DFBSD           43414900 T?   00000000)
ACPI: FACP 0x0000000040000200 000080 (v01 DFBSD           43414900 T?   00000000)
ACPI: DSDT 0x0000000040001000 000043 (v02 TST    MINDSDT  00000001 INTL 20251212)
ACPI: FACS 0x0000000040000280 000040
ACPI: APIC 0x0000000040000400 000078 (v03 DFBSD           43414900 T?   00000000)
sc0: no EFI framebuffer found.
atkbd: the current kbd controller command byte 0061
atkbd: scancode set -1
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0.nexus0.root0
sc0: <System console> [tentative] on motherboard
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <DFBSD > [tentative] on motherboard
acpi0: Not installing Darwin OSI on unsupported platform: QEMU
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI testing level/high
IOAPIC: irq 9, gsi 9 edge/high -> level/high
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi_timer0.acpi0.nexus0.root0
acpi_timer0 [tentative] on acpi0
ACPI timer looks GOOD min = 26, max = 101, width = 75
ACPI timer looks GOOD min = 26, max = 119, width = 93
ACPI timer looks GOOD min = 26, max = 115, width = 89
ACPI timer looks GOOD min = 26, max = 116, width = 90
ACPI timer looks GOOD min = 26, max = 133, width = 107
ACPI timer looks GOOD min = 26, max = 118, width = 92
ACPI timer looks GOOD min = 26, max = 112, width = 86
ACPI timer looks GOOD min = 26, max = 118, width = 92
ACPI timer looks GOOD min = 26, max = 112, width = 86
ACPI timer looks GOOD min = 26, max = 106, width = 80
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] on acpi0
acpi0: <DFBSD > [attached!] at irq 9 on motherboard
rdrand0: No RdRand support.
pcib0.legacy0.nexus0.root0
pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x1237, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7000, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0103, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7010, revid=0x00
	domain=0, bus=0, slot=1, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type I/O Port, range 32, base 0xc0a0, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x03
	domain=0, bus=0, slot=1, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=9
MPTABLE: fixed interrupt routing for 0:1 INTA
MPTABLE: Unable to route for bus 0 slot 1 INTA
found->	vendor=0x1234, dev=0x1111, revid=0x02
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Prefetchable Memory, range 32, base 0xfd000000, size 24, enabled
	map[18]: type Memory, range 32, base 0xfebd0000, size 12, enabled
found->	vendor=0x1af4, dev=0x1000, revid=0x00
	domain=0, bus=0, slot=3, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI-X supports 4 messages in map 0x14
	map[10]: type I/O Port, range 32, base 0xc080, size  5, enabled
	map[14]: type Memory, range 32, base 0xfebd1000, size 12, enabled
	map[20]: type Prefetchable Memory, range 64, base 0xfe000000, size 14, enabled
MPTABLE: 0:3 INTA routed to irq 11
IOAPIC: irq 11, gsi 11 edge/high -> level/low
found->	vendor=0x1af4, dev=0x1001, revid=0x00
	domain=0, bus=0, slot=4, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	MSI-X supports 7 messages in map 0x14
	map[10]: type I/O Port, range 32, base 0xc000, size  7, enabled
	map[14]: type Memory, range 32, base 0xfebd2000, size 12, enabled
	map[20]: type Prefetchable Memory, range 64, base 0xfe004000, size 14, enabled
MPTABLE: 0:4 INTA routed to irq 11
isab0.pci0.pcib0.legacy0.nexus0.root0
isab0: <PCI-ISA bridge> [tentative] at device 1.0 on pci0
isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI-ISA bridge> [attached!] at device 1.0 on pci0
atapci0.pci0.pcib0.legacy0.nexus0.root0
atapci0: <Intel PIIX3 WDMA2 controller> [tentative] port 0xc0a0-0xc0af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc0a0
ata0.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
interrupt uses mplock: ata0
ata0: identify ch->devices=00000000
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacy0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0xff msb=0xff
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
interrupt uses mplock: ata1
ata1: identify ch->devices=00010000
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: setting PIO4 on PIIX3 chip
acd0: setting WDMA2 on PIIX3 chip
acd0: <QEMU DVD-ROM/2.5+> DVDROM drive at ata1 as master
acd0: read 687KB/s (687KB/s), 512KB buffer, WDMA2
acd0: Reads: CDR, CDRW, DVDROM, DVDR, DVDRAM
acd0: Writes:
acd0: Audio: play, 2 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel PIIX3 WDMA2 controller> [attached!] port 0xc0a0-0xc0af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0
pci0: <bridge> (vendor 0x8086, dev 0x7113) at device 1.3 irq 9
vgapci0.pci0.pcib0.legacy0.nexus0.root0
vgapci0: <VGA-compatible display> [tentative] mem 0xfebd0000-0xfebd0fff,0xfd000000-0xfdffffff at device 2.0 on pci0
vgapci0: Boot video device
vgapci0: <VGA-compatible display> [attached!] mem 0xfebd0000-0xfebd0fff,0xfd000000-0xfdffffff at device 2.0 on pci0
virtio_pci0.pci0.pcib0.legacy0.nexus0.root0
virtio_pci0: <VirtIO PCI Network adapter> [tentative] port 0xc080-0xc09f mem 0xfe000000-0xfe003fff,0xfebd1000-0xfebd1fff irq 11 at device 3.0 on pci0
virtio_pci0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc080
virtio_pci0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfebd1000
vtnet0.virtio_pci0.pci0.pcib0.legacy0.nexus0.root0
vtnet0: <VirtIO Networking Adapter> [tentative] on virtio_pci0
virtio_pci0: host features: 0x79bf8064 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,GuestAnnounce,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxAllGSO,MacAddress,DynOffload>
virtio_pci0: negotiated features: 0x198f8020 <RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci0: attempting to allocate MSI-X #0 vector (4 supported)
alloc MSI-X intr 24 on cpu0
virtio_pci0: using IRQ 24 for MSI-X on cpu0
virtio_pci0: attempting to allocate MSI-X #1 vector (4 supported)
alloc MSI-X intr 25 on cpu0
virtio_pci0: using IRQ 25 for MSI-X on cpu0
virtio_pci0: attempting to allocate MSI-X #2 vector (4 supported)
alloc MSI-X intr 26 on cpu0
virtio_pci0: using IRQ 26 for MSI-X on cpu0
virtio_pci0: using 3 MSI-X vectors
vtnet0: bpf attached
vtnet0: MAC address: 52:54:00:12:34:56
map MSI-X intr 24 on cpu0
map MSI-X intr 25 on cpu0
map MSI-X intr 26 on cpu0
vtnet0: <VirtIO Networking Adapter> [attached!] on virtio_pci0
virtio_pci0: <VirtIO PCI Network adapter> [attached!] port 0xc080-0xc09f mem 0xfe000000-0xfe003fff,0xfebd1000-0xfebd1fff irq 26,25,24,11 at device 3.0 on pci0
virtio_pci1.pci0.pcib0.legacy0.nexus0.root0
virtio_pci1: <VirtIO PCI Block adapter> [tentative] port 0xc000-0xc07f mem 0xfe004000-0xfe007fff,0xfebd2000-0xfebd2fff irq 11 at device 4.0 on pci0
virtio_pci1: Reserved 0x80 bytes for rid 0x10 type 4 at 0xc000
virtio_pci1: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfebd2000
vtblk0.virtio_pci1.pci0.pcib0.legacy0.nexus0.root0
vtblk0: <VirtIO Block Adapter> [tentative] on virtio_pci1
virtio_pci1: host features: 0x79007e54 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,WriteZeroes,Discard,MultiQueue,ConfigWCE,Topology,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10001a54 <RingIndirect,MultiQueue,ConfigWCE,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: attempting to allocate MSI-X #0 vector (7 supported)
alloc MSI-X intr 27 on cpu0
virtio_pci1: using IRQ 27 for MSI-X on cpu0
virtio_pci1: using 1 MSI-X vectors
map MSI-X intr 27 on cpu0
vtblk0: Virtio: ncylinders at legacy maximum (16383), recalculating to 62415
vtblk0: Block size: 512
vtblk0: 30720MB (62914560 512 byte sectors: 16H 63S/T 16383C)
vtblk0: <VirtIO Block Adapter> [attached!] on virtio_pci1
virtio_pci1: <VirtIO PCI Block adapter> [attached!] port 0xc000-0xc07f mem 0xfe004000-0xfe007fff,0xfebd2000-0xfebd2fff irq 27,11 at device 4.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <MPTABLE Host-PCI bridge> [attached!] pcibus 0 on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
orm0: <ISA Option ROM> [tentative] at iomem 0xe8000-0xeffff on isa0
orm0: <ISA Option ROM> [attached!] at iomem 0xe8000-0xeffff on isa0
adv0 [tentative] failed to probe on isa0
atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] irq 1 on atkbdc0
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
vbd0: type 0x6c, start 63, end = 62899199, size 62899137 : OK
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0.atkbdc0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 0f ff
VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 0f ff
VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 0f ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
it3 [tentative] failed to probe at port 0x228-0x22f on isa0
wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0
wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0
sio0: irq maps: 0x8003 0x8013 0x8013 0x8013
sio0.isa0.isab0.pci0.pcib0.legacy0.nexus0.root0
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
lnc0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
(probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0?
usbpf: Initialized
lo0: bpf attached
hpt27xx: no controller detected.
hptrr: no controller detected.
CAM: Configuring bus: ata0
CAM: Configuring bus: ata1
CAM: Configuring 2 busses
CAM: Finished configuring bus: ata0
CAM: Finished configuring bus: ata1
CAM: finished configuring all busses
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ATA PseudoRAID loaded
Mounting root from hammer2:vbd0s1d
hammer2_mount: root devstr="vbd0s1d"
hammer2_mount: device="vbd0s1d" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/vbd0s1d" zone=1 id=0 offset=0x0000000000000000 size=0x000000063f000000
hammer2_mount: hmp=0xfffff8008e140000 pmp=0xfffff8008e8e0000
DMA space used: 3280k, remaining available: 131072k
Mounting devfs
start_init: trying /sbin/init
Loading configuration files.
Loading devfs rules: /etc/defaults/devfs.conf.
Initializing random seed: done. 
dumpon: crash dumps to /dev/vbd0s1b (25, 0x20001)
Starting file system checks:
/dev/vbd0s1a: 711 files, 342724 used, 180435 free (163 frags, 22534 blocks, 0.0% fragmentation)
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
hammer2_mount: "vbd0s1d": no recovery needed
hammer2: enable read/write
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
HAMMER2: VOLDATA DUMP
HAMMER2: INITIATE SPANs
Mounting tmpfs at /var/run/shm.
Setting hostname: dfbsd.
Starting dhclient.
starting dhclient on vtnet0
lo0: flags=808049<UP,LOOPBACK,RUNNING,MULTICAST,PROXY> metric 0 mtu 16384
	options=43<RXCSUM,TXCSUM,RSS>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	groups: lo
vtnet0: flags=808802<BROADCAST,SIMPLEX,MULTICAST,PROXY> metric 0 mtu 1500
	options=28<VLAN_MTU,JUMBO_MTU>
	ether 52:54:00:12:34:56
	media: Ethernet 1000baseT <full-duplex>
	status: active
route: writing to routing socket: Network is unreachable
add net default: gateway 10.0.2.2: Network is unreachable
Additional routing options:.
Starting devd.
virtio_pci0: host features: 0x79bf8064 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,GuestAnnounce,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxAllGSO,MacAddress,DynOffload>
virtio_pci0: negotiated features: 0x198f8020 <RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Link is up
Additional TCP options:.
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/libdata/ldconfig/pkg
Building databases...
Starting syslogd.
Oct  8 04:22:35 dfbsd syslogd: kernel boot file is /boot/kernel/kernel

No core dumps found.
swap low/high-water marks set to 41940/62910
swapon: adding /dev/vbd0s1b as swap device
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
sendmail_submit: /etc/mail/aliases.db not present,  generating
sendmail_clientmqueue: /etc/mail/aliases.db not present,  generating
Starting cron.
Local package initialization:.

Thu Oct  8 04:22:35 UTC 2026


DragonFly/x86_64 (dfbsd) (ttyd0)



login: