[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ed60
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0x5a pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=2250
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0x37 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=1375
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff801175dbca0
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8008bb64a00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0xa5 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=-2275
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0x5a pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=2250
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
[fakebb] stack pre-loaded with 0x37 pattern
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=1375
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached
fakebb0: <fake GPIO bit-bang i2c master+slave> on motherboard
iicbb0: <I2C bit-banging driver> on fakebb0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
[fakebb] attach done: resets=3 resets_with_oldaddr=1 bus=0xfffff8011763ee00
[fakebb] request_bus error=0
[fakebb] write: error=0 sent=8 slave_rx=deadbeef55aa1234 ok=1
[fakebb] read: error=0 read=8 data=c0c1c2c3c4c5c6c7 ok=1
[fakebb] nacked-write: error=2 (IIC_ENOACK=2) bus_started_after=0
[fakebb] repstart-read: error=0 byte=0xc0 (expect 0xc0)
[fakebb] SUMMARY: write_ok=1 read_ok=1 starts=5 stops=4 rxlen=0 spray_sink=0
rdrand0: No RdRand support.
iicbus0: detached
iicbb0: detached
fakebb0: detached