DF-5407 / run.2.log
HX5407: DF-5407 uplcom attach-chain stall harness, hz=100, USB_DEFAULT_TIMEOUT=5000 ms HX5407[A]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[A]: EP0 req #1: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #2: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #3: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #4: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #5: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #6: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #7: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #8: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #9: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #10: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #11: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #12: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #13: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #14: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: uplcom_attach chain DONE: 67337 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407[B]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[B]: EP0 req #15: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #16: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #17: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #18: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #19: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #20: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #21: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #22: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #23: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #24: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #25: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #26: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #27: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #28: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: uplcom_attach chain DONE: 2170 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407: harness complete (wLength>4 overruns: 0) HX5407: DF-5407 uplcom attach-chain stall harness, hz=100, USB_DEFAULT_TIMEOUT=5000 ms HX5407[A]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[A]: EP0 req #1: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #2: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #3: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #4: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #5: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #6: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #7: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #8: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #9: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #10: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #11: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #12: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #13: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #14: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: uplcom_attach chain DONE: 67320 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407[B]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[B]: EP0 req #15: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #16: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #17: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #18: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #19: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #20: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #21: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #22: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #23: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #24: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #25: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #26: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #27: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #28: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: uplcom_attach chain DONE: 2204 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407: harness complete (wLength>4 overruns: 0) HX5407: DF-5407 uplcom attach-chain stall harness, hz=100, USB_DEFAULT_TIMEOUT=5000 ms HX5407[A]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[A]: EP0 req #1: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #2: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #3: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #4: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #5: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #6: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #7: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #8: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #9: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #10: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #11: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #12: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #13: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: EP0 req #14: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 4900 ms, then OK) HX5407[A]: uplcom_attach chain DONE: 67369 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407[B]: uplcom_attach chain enter (uplcom.c:412 uplcom_reset + uplcom.c:433 uplcom_pl2303_init, chiptype=PL2303HX) HX5407[B]: EP0 req #15: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #16: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #17: type=0x40 req=0x01 val=0x0404 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #18: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #19: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #20: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #21: type=0x40 req=0x01 val=0x0404 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #22: type=0xc0 req=0x01 val=0x8484 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #23: type=0xc0 req=0x01 val=0x8383 idx=0x0000 len=1 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #24: type=0x40 req=0x01 val=0x0000 idx=0x0001 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #25: type=0x40 req=0x01 val=0x0001 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #26: type=0x40 req=0x01 val=0x0002 idx=0x0044 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #27: type=0x40 req=0x01 val=0x0008 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: EP0 req #28: type=0x40 req=0x01 val=0x0009 idx=0x0000 len=0 (device NAKs 150 ms, then OK) HX5407[B]: uplcom_attach chain DONE: 2183 ms pinned, 14 sync EP0 requests (14 expected: 1 reset + 13 init) HX5407: harness complete (wLength>4 overruns: 0)