DF-5397 / run.serial-patched-clean.log
XMMNNOO-\|/-\|/-\|/-\|/
1. Boot DragonFly [kernel] ,--, ,--,
2. Boot DragonFly in Safe Mode | `-, _:_ ,-' |
3. Boot DragonFly without AHCI driver `, `-, (/ \) ,-' ,'
4. Boot DragonFly without ACPI driver `-, `-,/ \,-' ,-'
9. Escape to loader prompt (also ESC) `------{ }------'
o. Boot DragonFly using kernel.old ,----------{ }----------,
r. Boot DragonFly to a rescue ramdisk | _,-{ }-,_ |
s. Boot DragonFly in single user mode `-,__,-' \ / `-,__,-'
v. Boot DragonFly with verbose logging | |
R. Reboot | |
| |
| |
| |
| |
`,'
Booting in 10 seconds...
Booting in 9 seconds...
Booting in 8 seconds...
Booting in 7 seconds...
Booting in 6 seconds...
Booting in 5 seconds...
Booting in 4 seconds...
Booting in 3 seconds...
Booting in 2 seconds...
Booting in 1 second...
Booting in 0 seconds...
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-kernel (from /boot/kernel/kernel) text=0xbdcc80 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x1791d7+0x9defe9 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\syms=[0x8+0x101c88|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+0x8+0xdc61d-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|]
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-ehci.ko \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-size 0x88118 at 0x1d14000
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|xhci.ko /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\size 0x94eb0 at 0x1d9d000
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Copyright (c) 2003-2026 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 6.5-DEVELOPMENT #2: Sun Oct 4 03:29:51 UTC 2026
root@dfbsd:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: frequency 100000000
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 34223 min=31920 max=98788
TSC clock: 3600007786 Hz, NOT invariant
CPU: QEMU Virtual CPU version 2.5+ (3600.01-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x60fb1 Family=0xf Model=0x6b Stepping=1
Features=0x1783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x80202001<SSE3,CX16,x2APIC,VMM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
MONITOR/MWAIT Features=0x2<INTBRK>
VMM/Hypervisor: Origin="KVMKVMKVM"
real memory = 4293372928 (4094 MB)
avail memory = 4088532992 (3899 MB)
LAPIC: enter X2APIC mode
madt_lapic_probe: lapic_count=6 x2apic_count=0
ACPI CPUS = 6
lapic: divisor index 0, frequency 500002841 Hz
CPU Topology: cores_per_chip: 6; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
SMI Frequency (worst case): 43478 Hz (23 us)
Initialize MI interrupts for 6 cpus
TSC is not invariant, no further tests will be performed
Spectre: support=( none ) req=ffff operating=( none )
MDS: support=( none ) req=ffff operating=( none )
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
evdev device loaded.
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000F59A0 000014 (v00 BOCHS )
ACPI: RSDT 0x00000000BFFE1CAC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: FACP 0x00000000BFFE1B38 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: DSDT 0x00000000BFFE0040 001AF8 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: FACS 0x00000000BFFE0000 000040
ACPI: APIC 0x00000000BFFE1BAC 0000A0 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: HPET 0x00000000BFFE1C4C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
ACPI: WAET 0x00000000BFFE1C84 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
sc0: <System console> on motherboard
sc0: VGA <16 virtual consoles, flags=0x100>
acpi0: <BOCHS BXPC> on motherboard
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
isab0: <ACPI Generic ISA bridge> on acpi0
isa0: <ISA bus> on isab0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu4: <ACPI CPU> on acpi0
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu5: <ACPI CPU> on acpi0
cpu_cst5: <ACPI CPU C-State> on cpu5
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab1: <PCI-ISA bridge> at device 1.0 on pci0
isa1: <ISA bus> on isab1
atapci0: <Intel PIIX3 WDMA2 controller> port 0xc0c0-0xc0cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
interrupt uses mplock: ata0
ata1: <ATA channel 1> on atapci0
interrupt uses mplock: ata1
acd0: DVDROM <QEMU DVD-ROM/2.5+> at ata1-master WDMA2
pci0: <bridge> (vendor 0x8086, dev 0x7113) at device 1.3 irq 9
vgapci0: <VGA-compatible display> mem 0xfebd0000-0xfebd0fff,0xfd000000-0xfdffffff at device 2.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc080-0xc09f irq 10 at device 3.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
usb_alloc_device: parent_dev=0xfffff8008bb43380, bus=0xfffff8008df6fdb0, parent_hub=0, depth=0, port_index=0, port_no=1, speed=2, usb_mode=0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x79bf8064 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,GuestAnnounce,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxAllGSO,MacAddress,DynOffload>
virtio_pci0: negotiated features: 0x198f8020 <RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci0: using 3 MSI-X vectors
usb_probe_and_attach: iclass=9/0/0 iindex=0/0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa0 bRequest=0x06 wValue=0x2900 wIndex=0x0000 wLength=0x0009
usbd_do_request_flags: Handle Request function is set
vtnet0: MAC address: 52:54:00:12:34:56
virtio_pci1: <VirtIO PCI Block adapter> port 0xc000-0xc07f mem 0xfe004000-0xfe007fff,0xfebd2000-0xfebd2fff irq 10 at device 5.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x79007e54 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,WriteZeroes,Discard,MultiQueue,ConfigWCE,Topology,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10001a54 <RingIndirect,MultiQueue,ConfigWCE,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: using 6 MSI-X vectors
vtblk0: Virtio: ncylinders at legacy maximum (16383), recalculating to 62415
vtblk0: Block size: 512
vtblk0: 30720MB (62914560 512 byte sectors: 16H 63S/T 16383C)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0001 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x03 wValue=0x0008 wIndex=0x0002 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
uhub0: 2 ports with 2 removable, self powered
usb_probe_and_attach: end of interfaces at 1
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x01 wValue=0x0010 wIndex=0x0001 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_req_reset_port:
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x01 wValue=0x0014 wIndex=0x0001 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x03 wValue=0x0004 wIndex=0x0001 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
psm0: <PS/2 Mouse> irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ACPI: Enabled 2 GPEs in block 00 to 0F
rdrand0: No RdRand support.
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x01 wValue=0x0014 wIndex=0x0001 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
orm0: <ISA Option ROM> at iomem 0xe8000-0xeffff on isa1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa1
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 2 busses
usbd_req_reset_port: port 1 reset returning error=USB_ERR_NORMAL_COMPLETION
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usb_alloc_device: parent_dev=0xfffff8008e2f2060, bus=0xfffff8008df6fdb0, parent_hub=0xfffff8008e1bc300, depth=1, port_index=0, port_no=1, speed=2, usb_mode=0
usb_set_device_state: udev 0xfffff8008e1bcd00 state DETACHED -> POWERED
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x00 bRequest=0x05 wValue=0x0002 wIndex=0x0000 wLength=0x0000
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fbe0158, endpoint=0xfffff8008e1bce08, nframes=1, dir=write
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fbe0158 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=8, afrm=1, nfrm=1
usbd_callback_wrapper_sub: xfer=0xfffff8008fbe0158: Control transfer active on endpoint=0xfffff8008e1bce08
usbd_do_request_callback: st=1
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fbe0158, endpoint=0xfffff8008e1bce08, nframes=1, dir=write
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=1 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fbe0158 endpoint=0xfffff8008e1bce08 sts=0 alen=0, slen=0, afrm=1, nfrm=1
usbd_do_request_callback: st=1
usb_set_device_state: udev 0xfffff8008e1bcd00 state POWERED -> ADDRESSED
usbd_req_get_desc: id=0, type=1, index=0, max_len=8
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0008
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fd0c158, endpoint=0xfffff8008e1bce08, nframes=2, dir=write
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fd0c158 endpoint=0xfffff8008e1bce08 sts=0 alen=16, slen=16, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usbd_req_get_device_desc:
usbd_req_get_desc: id=0, type=1, index=0, max_len=18
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0100 wIndex=0x0000 wLength=0x0012
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=write
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=26, slen=26, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usbd_setup_device_desc: adding unit addr=2, rev=200, class=2, subclass=0, protocol=0, maxpacket=64, len=18, speed=2
usbd_req_get_desc: id=0, type=3, index=0, max_len=4
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0002
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=10, slen=10, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0300 wIndex=0x0000 wLength=0x0004
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=12, slen=12, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usb_alloc_device: Language selected: 0x0409
usbd_req_get_desc: id=1033, type=3, index=3, max_len=255
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0303 wIndex=0x0409 wLength=0x0002
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=10, afrm=2, nfrm=2
usbd_do_request_callback: st=2
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_req_get_desc: id=1033, type=3, index=1, max_len=255
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0301 wIndex=0x0409 wLength=0x0002
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=10, afrm=2, nfrm=2
usbd_do_request_callback: st=2
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_req_get_desc: id=1033, type=3, index=2, max_len=255
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0302 wIndex=0x0409 wLength=0x0002
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=10, afrm=2, nfrm=2
usbd_do_request_callback: st=2
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usb_alloc_device: setting config 0
usb_detach_device: udev=0xfffff8008e1bcd00
usb_cdev_free: Freeing device nodes
usb_config_parse: iface_index=255 cmd=1
usbd_req_get_config_desc_full: index=0
usbd_req_get_config_desc: confidx=0
usbd_req_get_desc: id=0, type=2, index=0, max_len=9
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0009
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=17, slen=17, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usbd_req_get_desc: id=0, type=2, index=0, max_len=67
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x06 wValue=0x0200 wIndex=0x0000 wLength=0x0043
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=75, slen=75, afrm=2, nfrm=2
usbd_do_request_callback: st=1
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x80 bRequest=0x00 wValue=0x0000 wIndex=0x0000 wLength=0x0002
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=2, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=10, afrm=2, nfrm=2
usbd_do_request_callback: st=2
usbd_transfer_stop: close
usbd_transfer_done: err=USB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER
usbd_set_config_index: status=0x0000
usbd_set_config_index: udev=0xfffff8008e1bcd00 cdesc=0xfffff8008d4625a0 (addr 2) cno=1 attr=0xc0, selfpowered=0, power=64
usb_set_device_state: udev 0xfffff8008e1bcd00 state ADDRESSED -> CONFIGURED
usbd_req_set_config: setting config 1
usbd_do_request_flags: udev=0xfffff8008e1bcd00 bmRequestType=0x00 bRequest=0x09 wValue=0x0001 wIndex=0x0000 wLength=0x0000
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=0
usbd_transfer_submit: xfer=0xfffff8008fe4ed58, endpoint=0xfffff8008e1bce08, nframes=1, dir=read
usb_dump_endpoint: endpoint=0xfffff8008e1bce08 edesc=0xfffff8008e1bd448 isoc_next=0 toggle_next=0 bEndpointAddress=0x00
usb_dump_queue: endpoint=0xfffff8008e1bce08 xfer:
usbd_transfer_submit: open
usbd_pipe_enter: enter
usbd_pipe_start: start
usbd_transfer_done: err=USB_ERR_NORMAL_COMPLETION
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=0xfffff8008fe4ed58 endpoint=0xfffff8008e1bce08 sts=0 alen=8, slen=8, afrm=1, nfrm=1
usbd_do_request_callback: st=1
usb_config_parse: iface_index=255 cmd=0
usb_config_parse: found idesc nendpt=1
usb_config_parse: iface_index=255 cmd=2
usb_config_parse: found idesc nendpt=1
usb_cdev_create: Creating device nodes
usbd_set_config_index: error=USB_ERR_NORMAL_COMPLETION
usb_alloc_device: new dev (addr 2), udev=0xfffff8008e1bcd00, parent_hub=0xfffff8008e1bc300
ugen0.2: <vendor 0x0525> at usbus0
usb_probe_and_attach: iclass=2/2/255 iindex=0/0
usb_probe_and_attach: end of interfaces at 1
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0x23 bRequest=0x01 wValue=0x0010 wIndex=0x0002 wLength=0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
CAM: finished configuring all busses
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
Mounting root from hammer2:vbd0s1d
hammer2_mount: root devstr="vbd0s1d"
hammer2_mount: device="vbd0s1d" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/vbd0s1d" zone=3 id=0 offset=0x0000000000000000 size=0x000000063f000000
hammer2_mount: hmp=0xfffff80090020000 pmp=0xfffff800907c0000
DMA space used: 17664k, remaining available: 131072k
Mounting devfs
Loading configuration files.
Loading devfs rules: /etc/defaults/devfs.conf.
Initializing random seed: done.
dumpon: crash dumps to /dev/vbd0s1b (26, 0x20001)
Starting file system checks:
/dev/vbd0s1a: 1395 files, 410913 used, 112246 free (1598 frags, 13831 blocks, 0.3% fragmentation)
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
hammer2_mount: "vbd0s1d": no recovery needed
hammer2: enable read/write
HAMMER2: VOLDATA DUMP
HAMMER2: INITIATE SPANs
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
Mounting tmpfs at /var/run/shm.
Setting hostname: dfbsd.
Starting dhclient.
starting dhclient on vtnet0
lo0: flags=808049<UP,LOOPBACK,RUNNING,MULTICAST,PROXY> metric 0 mtu 16384
options=43<RXCSUM,TXCSUM,RSS>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
vtnet0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,PROXY> metric 0 mtu 1500
options=28<VLAN_MTU,JUMBO_MTU>
ether 52:54:00:12:34:56
inet6 fe80::5054:ff:fe12:3456%vtnet0 prefixlen 64 tentative scopeid 0x1
inet 10.0.2.15 netmask 0xffffff00 broadcast 10.0.2.255
media: Ethernet 1000baseT <full-duplex>
status: active
route: writing to routing socket: File exists
add net default: gateway 10.0.2.2: File exists
Additional routing options:.
Starting devd.
kldload: can't load if_cdce: No such file or directory
Additional TCP options:.
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/libdata/ldconfig/pkg
Building databases...
Starting syslogd.
Oct 4 05:24:14 dfbsd syslogd: kernel boot file is /boot/kernel/kernel
No core dumps found.
swap low/high-water marks set to 41940/62910
swapon: adding /dev/vbd0s1b as swap device
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
sendmail_submit: /etc/mail/aliases.db not present, generating
sendmail_clientmqueue: /etc/mail/aliases.db not present, generating
Starting cron.
Local package initialization:.
Sun Oct 4 05:24:14 UTC 2026
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0001 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=0xfffff8008e1bc300 bmRequestType=0xa3 bRequest=0x00 wValue=0x0000 wIndex=0x0002 wLength=0x0004
usbd_do_request_flags: Handle Request function is set
DragonFly/x86_64 (dfbsd) (ttyd0)
login: