⬢ DragonFlyBSD Kernel Audit
DF-5334 / run.log
← back to finding ↓ download raw
Booting in 5 seconds... 
Booting in 4 seconds... 
Booting in 3 seconds... 
Booting in 2 seconds... 
Booting in 1 second... 
Booting in 0 seconds... 
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-kernel (from /boot/kernel/kernel) text=0xbce540 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-data=0x177b17+0x9dfde9 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/syms=[0x8+0xf7e18-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+0x8+0xba8d0/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\]
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ehci.ko -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/size 0x7c288 at 0x1cd9000
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\xhci.ko |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\size 0x8c778 at 0x1d56000
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Copyright (c) 2003-2026 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 6.5-DEVELOPMENT #0: Thu Jul  2 06:02:54 UTC 2026
    root@dfbsd:/usr/obj/usr/src/sys/X86_64_GENERIC
acpi_hpet: frequency 100000000
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 36997 min=32102 max=134040
TSC clock: 3600010040 Hz, NOT invariant
CPU: QEMU Virtual CPU version 2.5+ (3600.01-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x60fb1  Family=0xf  Model=0x6b  Stepping=1
  Features=0x1783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x80202001<SSE3,CX16,x2APIC,VMM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  MONITOR/MWAIT Features=0x2<INTBRK>
VMM/Hypervisor: Origin="KVMKVMKVM"
real memory  = 4293372928 (4094 MB)
avail memory = 4088926208 (3899 MB)
LAPIC: enter X2APIC mode
madt_lapic_probe: lapic_count=6 x2apic_count=0
ACPI CPUS = 6
lapic: divisor index 0, frequency 500002891 Hz
CPU Topology: cores_per_chip: 6; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
SMI Frequency (worst case): 45454 Hz (22 us)
Initialize MI interrupts for 6 cpus
TSC is not invariant, no further tests will be performed
Spectre: support=( none ) req=ffff operating=( none )
MDS: support=( none ) req=ffff operating=( none )
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
md0: Malloc disk
evdev device loaded.
kbd1 at kbdmux0
ACPI: RSDP 0x00000000000F59A0 000014 (v00 BOCHS )
ACPI: RSDT 0x00000000BFFE1CAC 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
ACPI: FACP 0x00000000BFFE1B38 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
ACPI: DSDT 0x00000000BFFE0040 001AF8 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
ACPI: FACS 0x00000000BFFE0000 000040
ACPI: APIC 0x00000000BFFE1BAC 0000A0 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
ACPI: HPET 0x00000000BFFE1C4C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
ACPI: WAET 0x00000000BFFE1C84 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
sc0: <System console> on motherboard
sc0: VGA <16 virtual consoles, flags=0x100>
acpi0: <BOCHS BXPC> on motherboard
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
isab0: <ACPI Generic ISA bridge> on acpi0
isa0: <ISA bus> on isab0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu4: <ACPI CPU> on acpi0
cpu_cst4: <ACPI CPU C-State> on cpu4
cpu5: <ACPI CPU> on acpi0
cpu_cst5: <ACPI CPU C-State> on cpu5
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab1: <PCI-ISA bridge> at device 1.0 on pci0
isa1: <ISA bus> on isab1
atapci0: <Intel PIIX3 WDMA2 controller> port 0xc0c0-0xc0cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
interrupt uses mplock: ata0
ata1: <ATA channel 1> on atapci0
interrupt uses mplock: ata1
acd0: DVDROM <QEMU DVD-ROM/2.5+> at ata1-master WDMA2
pci0: <bridge> (vendor 0x8086, dev 0x7113) at device 1.3 irq 9
vgapci0: <VGA-compatible display> mem 0xfebd0000-0xfebd0fff,0xfd000000-0xfdffffff at device 2.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc080-0xc09f irq 10 at device 3.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x79bf8064 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,GuestAnnounce,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxAllGSO,MacAddress,DynOffload>
virtio_pci0: negotiated features: 0x198f8020 <RingIndirect,AnyLayout,NotifyOnEmpty,SetMacAddress,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
virtio_pci0: using 3 MSI-X vectors
vtnet0: MAC address: 52:54:00:12:34:57
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
virtio_pci1: <VirtIO PCI Block adapter> port 0xc000-0xc07f mem 0xfe004000-0xfe007fff,0xfebd2000-0xfebd2fff irq 10 at device 5.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x79007e54 <EventIdx,RingIndirect,AnyLayout,NotifyOnEmpty,WriteZeroes,Discard,MultiQueue,ConfigWCE,Topology,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10001a54 <RingIndirect,MultiQueue,ConfigWCE,FlushCommand,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: using 6 MSI-X vectors
vtblk0: Virtio: ncylinders at legacy maximum (16383), recalculating to 62415
vtblk0: Block size: 512
vtblk0: 30720MB (62914560 512 byte sectors: 16H 63S/T 16383C)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
uhub0: 2 ports with 2 removable, self powered
psm0: <PS/2 Mouse> irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ACPI: Enabled 2 GPEs in block 00 to 0F
rdrand0: No RdRand support.
orm0: <ISA Option ROM> at iomem 0xe8000-0xeffff on isa1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa1
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 2 busses
ugen0.2: <QEMU> at usbus0
CAM: finished configuring all busses
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer2:vbd0s1d
hammer2_mount: root devstr="vbd0s1d"
hammer2_mount: device="vbd0s1d" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/vbd0s1d" zone=2 id=0 offset=0x0000000000000000 size=0x000000063f000000
hammer2_mount: hmp=0xfffff80090040000 pmp=0xfffff800907e0000
DMA space used: 17664k, remaining available: 131072k
Mounting devfs
Loading configuration files.
Loading devfs rules: /etc/defaults/devfs.conf.
Initializing random seed: done. 
dumpon: crash dumps to /dev/vbd0s1b (26, 0x20001)
Starting file system checks:
/dev/vbd0s1a: 713 files, 408700 used, 114459 free (163 frags, 14287 blocks, 0.0% fragmentation)
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
hammer2_mount: "vbd0s1d": no recovery needed
hammer2: enable read/write
HAMMER2: VOLDATA DUMP
HAMMER2: INITIATE SPANs
mount_hammer2: unable to connect to cluster controller
mount_hammer2: cluster_connect(/dev/vbd0s1d@ROOT) failed
Mounting tmpfs at /var/run/shm.
Setting hostname: dfbsd.
Starting dhclient.
starting dhclient on vtnet0
lo0: flags=808049<UP,LOOPBACK,RUNNING,MULTICAST,PROXY> metric 0 mtu 16384
	options=43<RXCSUM,TXCSUM,RSS>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	groups: lo
vtnet0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,PROXY> metric 0 mtu 1500
	options=28<VLAN_MTU,JUMBO_MTU>
	ether 52:54:00:12:34:57
	inet6 fe80::5054:ff:fe12:3457%vtnet0 prefixlen 64 tentative scopeid 0x1
	media: Ethernet 1000baseT <full-duplex>
	status: active
add net default: gateway 10.0.2.2
Additional routing options:.
Starting devd.
cdce0: <QEMU USB Net RNDIS Control Interface> on usbus0
cdce0: No valid alternate setting found


Fatal trap 12: page fault while in kernel mode
cpuid = 1; lapic id = 1
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x8:0xffffffff80647bad
stack pointer	        = 0x10:0xfffff8008e15d7d0
frame pointer	        = 0x10:0xfffff8008e15d830
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= Idle
current thread          = pri 28 
kernel: type 12 trap, code=0

CPU1 stopping CPUs: 0x0000003d
 stopped
Stopped at      lockmgr_exclusive+0x5d: orl     (%r14),%esi
db> trace
lockmgr_exclusive() at lockmgr_exclusive+0x5d 0xffffffff80647bad
uether_ifdetach() at uether_ifdetach+0x2f 0xffffffff8261eb6f
cdce_detach() at cdce_detach+0x2a 0xffffffff8260007a
cdce_attach() at cdce_attach+0x56b 0xffffffff82600b7b
device_doattach() at device_doattach+0x3af 0xffffffff8068dbef
usb_probe_and_attach() at usb_probe_and_attach+0x176 0xffffffff80a46306
uhub_explore() at uhub_explore+0x231 0xffffffff80a4d3b1
usb_bus_explore() at usb_bus_explore+0xd0 0xffffffff80a61520
usb_process() at usb_process+0x76 0xffffffff80a512a6
db> bt
No such command
db> call dumpsys
Physical memory: 4060 MB
Dumping 525 MB: 510 494 478 462 446 430 414 398 382 366 350 334 318 302 286 270 254 238 222 206 190 174 158 142 126 110 94 78 62 46 30 14
Dump complete
ffffffff81142e60
db>