media: Ethernet 1000baseT <full-duplex>
	status: active
route: writing to routing socket: File exists
add net default: gateway 10.0.2.2: File exists
Additional routing options:.
Starting devd.
Additional TCP options:.
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/libdata/ldconfig/pkg
Building databases...
Starting syslogd.
Oct  1 14:16:35 dfbsd syslogd: kernel boot file is /boot/kernel/kernel

No core dumps found.
swap low/high-water marks set to 41940/62910
swapon: adding /dev/vbd0s1b as swap device
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
sendmail_submit: /etc/mail/aliases.db not present,  generating
sendmail_clientmqueue: /etc/mail/aliases.db not present,  generating
Starting cron.
Local package initialization:.

Thu Oct  1 14:16:35 UTC 2026


DragonFly/x86_64 (dfbsd) (ttyd0)



login: [EVILSIM] stalled INQUIRY for target 0 lun 0, SIM marked DEREGISTERED
xpt_scan_bus: xpt_create_path failed with status 0x34, bus scan halted
[EVILSIM] back from XPT_SCAN_BUS: stall_seen=1 (scan_info has been freed while target-0 SCAN_LUN CCB is still outstanding)
[EVILSIM] sprayed 128 x 24-byte chunks with 0x41; scan_info->cpi is now 0x4141414141414141
[EVILSIM] completing stalled INQUIRY -> expect page fault at 0x41414141414141xx NOW
[EVILSIM] XPT_SCAN_BUS request completed (create_path failure branch taken)
(probe0:evilsim0:0:0:0): inquiry data fails comparison at DV1 step
(da0:evilsim0:0:0:0): got CAM status 0x6
(da0:evilsim0:0:0:0): fatal error, failed to attach to device
(da0:evilsim0:0:0:0): lost device
(da0:evilsim0:0:0:0): removing device entry


Fatal trap 12: page fault while in kernel mode
cpuid = 3; lapic id = 3
fault virtual address	= 0x10
fault code		= supervisor write data, page not present
instruction pointer	= 0x8:0xffffffff806879b0
stack pointer	        = 0x10:0xfffff8008d3338b8
frame pointer	        = 0x10:0xfffff8008d3338e0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= Idle
current thread          = pri 14 (CRIT)
kernel: type 12 trap, code=2

CPU3 stopping CPUs: 0x00000037
 stopped
Stopped at      _callout_init:  movq    $0,0x10(%rdi)
db>