camcontrol: error sending command
(pass0:vtscsi0:0:0:0): READ(10). CDB: 28 0 ff ff ff f0 0 0 1 0 
(pass0:vtscsi0:0:0:0): CAM Status: SCSI Status Error
(pass0:vtscsi0:0:0:0): SCSI Status: Check Condition
(pass0:vtscsi0:0:0:0): ILLEGAL REQUEST asc:21,0
(pass0:vtscsi0:0:0:0): Logical block address out of range
RC=1
cc: error: /tmp/sense_test.c: No such file or directory

/tmp/sense_test.c: In function 'main':
  int i;
      ^
sending out-of-range READ(10) with csio.sense_len=255
ccb_h.status     = 0xcc CAM_AUTOSNS_VALID CAM_SCSI_STATUS_ERROR
csio.scsi_status = 0x02 (0x02 = CHECK CONDITION)
csio.sense_resid = 237
csio.sense_data[0..31]:
  00: 70 00 05 00 00 00 00 0a 00 00 00 00 21 00 00 00
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VERDICT: sense_data is REAL (driver delivered autosense)
  sense key=0x05 ASC=0x21 ASCQ=0x00

sending out-of-range READ(10) with csio.sense_len=32
ccb_h.status     = 0xcc CAM_AUTOSNS_VALID CAM_SCSI_STATUS_ERROR
csio.scsi_status = 0x02 (0x02 = CHECK CONDITION)
csio.sense_resid = 14
csio.sense_data[0..31]:
  00: 70 00 05 00 00 00 00 0a 00 00 00 00 21 00 00 00
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VERDICT: sense_data is REAL (driver delivered autosense)
  sense key=0x05 ASC=0x21 ASCQ=0x00