DragonFlyBSD Kernel Audit
DF-2808 / panic.txt
← back to finding ↓ download raw
Starting dhclient.
starting dhclient on vtnet0
lo0: flags=808049<UP,LOOPBACK,RUNNING,MULTICAST,PROXY> metric 0 mtu 16384
	options=43<RXCSUM,TXCSUM,RSS>
	inet 127.0.0.1 netmask 0xff000000
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	groups: lo
vtnet0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,PROXY> metric 0 mtu 1500
	options=28<VLAN_MTU,JUMBO_MTU>
	ether 52:54:00:12:34:56
	inet6 fe80::5054:ff:fe12:3456%vtnet0 prefixlen 64 tentative scopeid 0x1
	media: Ethernet 1000baseT <full-duplex>
	status: active
add net default: gateway 10.0.2.2
Additional routing options:.
Starting devd.
Additional TCP options:.
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/libdata/ldconfig/pkg
Building databases...
Starting syslogd.
Sep  1 15:07:06 dfbsd syslogd: kernel boot file is /boot/kernel/kernel

No core dumps found.
swap low/high-water marks set to 41940/62910
swapon: adding /dev/vbd0s1b as swap device
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
sendmail_submit: /etc/mail/aliases.db not present,  generating
sendmail_clientmqueue: /etc/mail/aliases.db not present,  generating
Starting cron.
Local package initialization:.

Tue Sep  1 15:07:06 UTC 2026


DragonFly/x86_64 (dfbsd) (ttyd0)



login: 

Fatal trap 12: page fault while in kernel mode
cpuid = 3; lapic id = 3
fault virtual address	= 0xfffff80116e69000
fault code		= supervisor write data, page not present
instruction pointer	= 0x8:0xffffffff80bcaa0a
stack pointer	        = 0x10:0xfffff8011831b480
frame pointer	        = 0x10:0xfffff8011831b4d8
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 835
current thread          = pri 6 
kernel: type 12 trap, code=2

CPU3 stopping CPUs: 0x00000037
 stopped
Stopped at      memmove+0x10a:  repe movsq      (%rsi),%es:(%rdi)
db>