swap low/high-water marks set to 41940/62910
swapon: adding /dev/vbd0s1b as swap device
NFS CLIENT: access_cache_timeout=5 neg_cache_timeout=3.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
sendmail_submit: /etc/mail/aliases.db not present,  generating
sendmail_clientmqueue: /etc/mail/aliases.db not present,  generating
Starting cron.
Local package initialization:.

Sat Aug 29 20:48:08 UTC 2026


DragonFly/x86_64 (dfbsd) (ttyd0)



login: vn2: MBR magic not found; assume a COMPATIBILITY_SLICE (s0)
vn2: MBR magic not found; assume a COMPATIBILITY_SLICE (s0)
hammer2_mount: devstr="/dev/vn2@DATA"
hammer2_mount: device="/dev/vn2" label="DATA" rdonly=0
hammer2_ondisk: "/dev/vn2" zone=0 id=0 offset=0x0000000000000000 size=0x0000000020000000
hammer2_mount: "/dev/vn2": no recovery needed
hammer2_mount: hmp=0xfffff80118340000 pmp=0xfffff80118ae0000
HAMMER2: VOLDATA DUMP
HAMMER2: INITIATE SPANs
HAMMER2: CONN WAS TERMINATED
hammer2_chain_load_data: I/O error 000000000240080a: 5
hammer2: unable to fsync inode 0xfffff80118b805c0
hammer2_chain_load_data: I/O error 000000000240080a: 5
hammer2_chain_load_data: I/O error 000000000240080a: 5
hammer2: chain error during flush
hammer2_chain_load_data: I/O error 000000000240080a: 5
PARENT ERROR DURING FLUSH LOCK 0xfffff80118aa1080->0xfffff80118aa1680
hammer2_chain_load_data: I/O error 000000000240080a: 5
hammer2: chain error during flush
hammer2_chain_load_data: I/O error 000000000240080a: 5
PARENT ERROR DURING FLUSH LOCK 0xfffff80118aa1080->0xfffff80118aa2280
hammer2_chain_load_data: I/O error 000000000240000a: 5
hammer2_chain_load_data: I/O error 000000000240080a: 5
hammer2: chain error during flush


Fatal trap 12: page fault while in kernel mode
cpuid = 3; lapic id = 3
fault virtual address	= 0x200
fault code		= supervisor read data, page not present
instruction pointer	= 0x8:0xffffffff80981f4c
stack pointer	        = 0x10:0xfffff801190139d0
frame pointer	        = 0x10:0xfffff80119013a10
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= Idle
current thread          = pri 12 (CRIT)
kernel: type 12 trap, code=0

CPU3 stopping CPUs: 0x00000037
 stopped
Stopped at      hammer2_xop_inode_flush+0x39c:  repe movsq      (%rsi),%es:(%rdi)
db>